Device Connection

The connection method varies depending on the device you are using and the setting contents.
Especially, please be careful on devices with multiple connection methods to PC.

In order to configure the device, the device driver must be installed in advance.
For how to install the device driver, see "Construction of Driver Environment".

Product Name	Network Settings	Fail-Safe Settings	Device Name Setting	Firmware Update
AI-1608AIN-USB AI-1608VIN-USB AO-1604AIN-USB AO-1604VIN-USB CNT-3204IN-USB DIO-1616LN-USB GPIB-FL2-USB	-	-	-	USB *1
CAN-2-USB	-	-	USB	-
DIO-1616LN-ETH DIO-1616RYN-ETH	LAN	LAN	LAN	LAN *2
AI-1608AIN-ETH AI-1608VIN-ETH AO-1604AIN-ETH AO-1604VIN-ETH CNT-3204IN-ETH	LAN	-	LAN	LAN *2
CAN-2-WF	-	-	Wi-Fi or USB *3	-
GW1-ETH-WQ GW1-ETH-WQ-CN GW1-ETH-WQ-EU GW1-ETH-WQ-US	USB	-	-	USB
DIO-0404LY-WQ DIO-0404LY-WQ-CN DIO-0404LY-WQ-EU DIO-0404LY-WQ-US	USB	USB	LAN *4	USB
AI-1004LY-WQ AI-1004LY-WQ-CN AI-1004LY-WQ-EU AI-1004LY-WQ-US	USB	-	LAN *4	USB
CONPROSYS nano series CONPROSYS nano CPSN-AI-1208LI CPSN-AI-2408LI CPSN-AO-1602LC CPSN-CNT-3201I CPSN-DI-08L CPSN-DI-08BL CPSN-DI-16BCL CPSN-DIO-08SL CPSN-DO-08L CPSN-DO-08BL CPSN-DO-08RL CPSN-DO-08BRL CPSN-DO-16L CPSN-DO-16BL CPSN-RRY-4PCA	LAN *4	-	LAN *4	-
USB I/O Unit – Module Type CC-USB271-CPSN4 CPSN-AI-1208LI CPSN-AI-2408LI CPSN-AO-1602LC CPSN-CNT-3201I CPSN-DI-08L CPSN-DI-08BL CPSN-DI-16BCL CPSN-DIO-08SL CPSN-DO-08L CPSN-DO-08BL CPSN-DO-08RL CPSN-DO-08BRL CPSN-DO-16L CPSN-DO-16BL CPSN-RRY-4PCA	-	-	-	USB *1

*1 Hardware setting (Module ID = F: F) is required beforehand.
*2 Hardware setting (Group ID = E) is required beforehand.
*3 These are displayed as different devices in the device display area when you connect it via Wi-Fi or via USB.
Please refer [Cannot see the connected "CAN-2-WF" device on the utility software] to know more details.
*4 In order to set the device name, you need to set up the network in advance, and connect to the master unit via LAN.