The device settings are generally performed in the following steps.
For details, please refer to the setup procedure for your device.
1. Connecting Device
The connection method varies depending on the device you are using and the setting contents.
2. Launching Utility
Launch the CONTEC Device Utility from the Utility folder of the driver library.
3. Set
You can set the device name, delete device registration,
update firmware, and configure failsafe setting.
The setting items and operation procedure differ depending on the device you use.
Refer to the Operation Procedure by Device.
4. Rebooting
Rebooting the device and utility is required depending on the device and setting contents.