Set the I/O address and interrupt level in the following range to avoid conflict with your system. Parameter setting for the board must match the setting made with Setup of Property.
I/O address
02E1H, 22E1H, 42E1H, 62E1H, 82E1H, A2E1H, C2E1H, E2E1H
Set the I/O address using the rotary switch, SW1. The factory default setting is 62E1H(3).
Interrupt level
IRQ3-7, 9(2)-12, 14, 15
Set the interrupt level using the rotary switch, SW2. The factory default setting is IRQ5 (5).
A system can be made to recognize a resource in WindowsXP/2000/Me/98SE/98/95 using an information file.
Please refer tp Resister board.
A setup of the board at the time of shipment is shown below.