No
Item
Value
Setting Method
Device symbol
Setting condition
1
I/O address
02D0H
JP1
2
Interrupt Level
IRQ5
JP2
JP3
3
DMA
1
JP4
JP5
Set the I/O address and interrupt level in the following range to avoid conflict with your system. Parameter setting for the board must match the setting made with the Setup of Property program.
I/O address
02E1H, 22E1H, 42E1H, 62E1H, 82E1H, A2E1H, C2E1H, E2E1H
Set the I/O address using JP1. The factory default setting is 62E1H.
Interrupt level
IRQ3-7, 9(2)
Set the interrupt level using JP2 and JP3. The factory default setting is IRQ5.
A system can be made to recognize a resource in WindowsXP/2000/Me/98SE/98/95 using an information file.
Please refer tp Resister board.
A setup of the board at the time of shipment is shown below.
No |
Item |
Value |
Setting Method |
|
Device symbol |
Setting condition |
|||
1 |
I/O address |
02D0H |
JP1 |
|
2 |
Interrupt Level |
IRQ5 |
JP2 |
|
JP3 |
|
|||
3 |
DMA |
1 |
JP4 |
|
JP5 |
|
|||