-Use function
Initialization function ( SmcWSetErcAlmClearTime SmcWSetErcMode )
-Outline
The width etc. of a clear signal are set by using the initialization function.
-Operation method
• Counter Clear(ERC)
Stop by LIM and ALM input
0 : When stopping by LIM and the ALM signal input, the ERC signal is not output.
1 : When stopping by LIM and the ALM signal input, the ERC signal is output.
ORG motion end
0: When the starting point resume operation is completed, the ERC signal is not output.
1: When the starting point resume operation is completed, the ERC signal is output.
• Counter Clear Time(The width of a deflection counter clear signal is set. )
12[usec]
102[usec]
408[usec]
1.6[msec]
13[msec]
52[msec]
104[msec]
Level output
• Counter Off Timer(The time of deflection counter clear signal OFF timer is set. )
0[usec]
12[usec]
1.6[msec]
104[msec]
• Alarm Clear Time(The width of an alarm clear signal is set. )
12[usec]
102[usec]
408[usec]
1.6[msec]
13[msec]
52[msec]
104[msec]
• To apply the settings to the device, click [q:Back] to return to the initial setting menu and execute [2:Set].