C-WaveformGenerator has the following features.
- Six types of basic
waveforms are registered in the software. (DC, sine wave, triangle
wave, square wave, sawtooth wave, noise)
Simply select a basic
waveform and click the OUTPUT button to generating output.
- You can fine-tune the basic
waveform by changing the frequency (Hz), amplitude (Vpp), offset value,
phase, and duty ratio.
Since the generating waveform for one cycle is always
displayed in a graph, you can visually check the fine-tuned waveform data.
- It is also possible to perform sweep calculations on basic
waveforms offline.
It supports frequency sweep, amplitude sweep, DC offset
sweep and square wave duty sweep.
- Fine-tuned waveform data and sweep-processed waveform data can be
saved in CSV format.
Each value of waveform data can be checked with Microsoft
Excel or a general text editor.
- Maximize the capabilities of analog output devices.
When used with memory-equipped devices, the timing
of the generating output is guaranteed at the hardware level.
Auto burst oscillation is possible.
When used together with a device equipped with an external trigger function, it can be applied to triggered burst oscillation by a signal change to the external trigger input terminal (AO START).
- Separately, if you define data in a CSV format file, you can also generate an arbitrary waveform (Arbitrary) and output it.
Waveform data generated with Microsoft Excel can also
be used with C-WaveformGenerator if saved in CSV format.
CSV files saved with the data logger software C-LOGGER
can also be generated and output as is.
- It is included C-WaveformGenerator SDK which can make control from your application software.
C-WaveformGenerator SDK has two access types. One is under Windows API, the other one is under Component Object Model (COM).