Event Setting
② Count Match Setting [cnt_event.vi]

　Select to use count match event

When CPSN-CNT-3201I or CPSN-CNT-3201I2 is used in combination with CPSN-MCB271-xxx,
it does not support event notification, but you can set a comparison value for counts that output one-shot pulses

IN/OUT Terminal layout

Input terminal

[Essential]
Specify the channel number to set the count match event

[Essential]
Specify comparison value of count match event

Setting range

  For a 24-bit counter device: 0 to 16,777,215 (FFFFFFH)
  For a 32-bit counter device: 0 to 4,294,967,295 (FFFFFFFFH)
  For CPSN-DI-16BCL, CPSN-DI-08FCL, CPSN-DI-08FCRL: 0 to 4,294,967,295 (FFFFFFFFH)

Specify comparison register number

Setting range:  0 or 1

*Basically, there is one comparison register for each channel and the register number is 0, so this setting value is usually 0.
 However, the counter device with high-performance counter has two comparison registers for each channel, so 0 or 1 can be set.