Select when analog input from 1 channel for one time and get the voltage/current value
AiChannel |
Initial value: 0 |
[Essential]
Specify the channel No. to perform analog input
Mode |
Initial value: 0 |
Normally not connected or specified as 0
The following settings are available only for wireless
I/O devices
0: Refers to the input data of the slave
stored in the Gatway
1: Directly access the Terminal and refer to the input data
2: Refer to the input data of the Terminal stored in the Gatway and the
elapsed time (ElapsedTime)
AiData |
Get the analog input data with voltage/current value
ElapsedTime |
Gets the elapsed time (seconds) after data is stored in the Gatway when Mode=2 is set in the wireless I/O device