Stop
① Automatic Selection [stop.vi]

 

Stop the sampling, generating, or counter operation

Although there are the special VI for counter and digital, basically this VI is used

 

Layout of IN/OUT terminal

 

This VI has only common IN/OUT terminals

For analog and digital, when performed this VI, both input (sampling) and output (generating) operations will be stopped

When stopping the operation of the counter device with this VI, the following operation is performed

 

Type with sampling function

counter device

General type

counter device

counter operation

-

Stop counters on all channels

Counter operation

and

sampling stop

Stop counters on all channels

-

Counter stops

and

sampling operation

Stop sampling

-

Counter operation

and

sampling operation

Stop sampling

If [Stop setting] is [Counter synchronization stop],

the counter is also stopped

-

 

In order to output 0V after outputting waveform

After outputting waveform, the signal level output from the device is retained at the last output data.

It's same as all the data has been output. And it's same as output is terminated forcedly by [stop] VI.

If you want to make the signal level to 0V after outputting waveform, you can set the last data to 0V, or write (output) 0V for 1 time output without buffer.