DeviceType Type
Digital
devices other than
the following |
0 : General |
DIO-24DY-USB |
1 : Double direction |
PIO-48D(LPCI)H,
DIO-48D2-PCI, |
2 : Double direction (8255) |
PIO-32DM(PCI),
DIO-32DM2-PE, DIO-32DM3-PE |
3 : Double direction (32DM) |
AiRange Initial value
Analog
devices other than
the following |
0 (±10V) |
(Analog
E Series) |
Depend on the jumper settings on board *After performing the jumper settings, AiRange should also be set to match it |
AoRange Initial value
Analog
devices other than
the following |
0 (±10V) |
(Analog
G Series) (Analog F Series) |
53(0-2.5V) |
AD12-16(PCI), AD12-64(PCI) (Analog
E Series) |
Depend on the jumper settings on board *After performing the jumper settings, AoRange should also be set to match it |
Analog input related setting
AiSamplingClock Settable values(microsecond)
AIO-121602LN-USB (Analog
F Series) |
2 - 107,374,182 |
(Analog
G series standard type) |
10 - 107,374,182 |
(Analog
G series high-speed type) |
1 - 107,374,182 |
(Analog
Z series) |
0.1 - 53,687,091 |
(Analog
E series standard type) |
10 - 6,710,886 |
(Analog
E series high-speed type) |
1 - 6,710,886 |
AI-1608AY-USB, AIO-160802AY-USB (Analog
L series) |
10 - 107,374,182 |
AD12-16(PCI),
AD12-64(PCI) |
10 - 1,073,741,824 |
AIO-160802GY-USB |
4 - 107,374,182 |
AIO-121602LN-USB |
5 - 107,374,182 |
CPS-AI-1608LI,
CPS-AI-1608ALI |
10 - 107,374,182 |
AiRepeatTimes Settable values
Analog
input devices other
than the following |
1 ( No repeat operation) |
(Analog
G Series) (Analog F Series) |
0, 1 - 65,535 |
(Analog
E Series) |
0, 1 - 16,777,216 *1 |
AD12-16(PCI), AD12-64(PCI) (Analog
L series) |
0, 1 - 4,294,967,295 |
AI-1204Z-PE,
AI-1204Z-PCI, CPS-AI-1608LI, CPS-AI-1608ALI |
Cannot be set Please specify -1 |
*1 When [Setting Trigger] is [Software], the available value is 1 fixed (no repeat)
AiClockEdge Settable values
Analog input devices other than the following |
0: Falling Edge 1: Rising Edge |
AD12-16(PCI), AD12-64(PCI) (Analog
E Series) |
0: Falling Edge |
CPS-AI-1608LI,
CPS-AI-1608ALI |
Cannot be set Please specify -1 |
AiScanClock Settable values(microsecond)
Analog input devices other than the following |
Cannot be set Please specify -1 |
(Analog
G series standard type) |
10 - 107,374,182 |
(Analog
G series high-speed type) |
1 - 107,374,182 |
(Analog
F Series) |
2 - 1,638 |
(Analog
E Series standard type) |
10 - 1,638 |
(Analog
E Series high-speed type) |
1 - 1,638 |
Analog output related setting
AoSamplingClock Settable values(microsecond)
Analog
output devices other
than the following |
10 - 107,374,182 |
(Analog
G series 12bit type) |
6 - 107,374,182 |
(Analog
G series 16bit type) |
10 - 1,073,741,824 |
DA12-16(PCI),
DA12-8(PCI), DA12-4(PCI) |
10 - 1,073,741,824 |
DA16-4C(PCI) |
20 - 1,073,741,824 |
AIO-121602LN-USB,
AIO-120802LN-USB |
12 - 107,374,182 |
CPS-AO-1604LI,
CPS-AO-1604VLI |
10 - 107,374,182 |
AoRepeatTimes Settable values
Analog
output devices other
than the following |
1 (No repeat operation) |
(Analog
G series) (Analog F series) |
0, 1 - 65,535 |
(Analog
L series) |
0, 1 - 4,294,967,295 |
AO-1604LX-USB,
AIO-160802AY-USB, AIO-160802GY-USB, |
0, 1 - 4,294,967,295 *2 |
CPS-AO-1604LI,
CPS-AO-1604VLI |
Cannot be set Please specify -1 |
*2 When [Setting Trigger] or [Setting for Stop] is [External trigger], the available value is 1 fixed (no repeat).
AoClockEdge Settable values
output devices other than the following |
0:
Falling Edge |
DA12-16(PCI),
DA12-8(PCI), |
0: Falling Edge |
CPS-AO-1604LI,
CPS-AO-1604VLI |
Cannot be set Please specify -1 |
Selectable trigger types (Analog input)
Analog
input devices other
than the following *3 |
Software / External Trigger/ Level comparison |
(Analog
G series) (Analog F series) (Analog
Z series) |
Software / External Trigger/ Level comparison / In Range comparison / Out Range comparison |
CPS-AI-1608LI,
CPS-AI-1608ALI |
Software |
Selectable trigger types (Analog output)
Analog
output devices other
than the following *3 |
Software / External Trigger |
CPS-AO-1604LI,
CPS-AO-1604VLI |
Software |
AiStartTrgEdge Settable values
Analog input devices other than the following *3 |
0:
Falling Edge |
AD12-64(PCI),
AD12-16(PCI) |
0: Falling Edge |
AoStartTrgEdge Settable values
Analog output devices other than the following *3 |
0:
Falling Edge |
DA12-16(PCI),
DA12-8(PCI), DA12-4(PCI) |
0: Falling Edge |
*3 Only for the devices supported by DAQ-LV-WIN (There are products with no external trigger terminal on our analog device)
Selectable trigger types (Analog input)
Analog input devices other than the following *3 |
Specified times / External Trigger / Level comparison / Software |
(Analog
G series) (Analog
F series) (Analog
Z series) |
Specified times / External Trigger / Level comparison / Software / In Range comparison / Out Range comparison |
CPS-AI-1608LI,
CPS-AI-1608ALI |
Specified times / Software |
Selectable trigger types (Analog output)
Analog output devices other than the following *3 |
Specified times / External Trigger |
CPS-AO-1604LI,
CPS-AO-1604VLI |
Specified times |
AiStopTimes Settable values
(Analog
G series) (Analog Z series PCI Express) |
1 - 134,217,728 |
(Analog
F series) (Analog
Z series PCI) |
1 - 67,108,864 |
AI-1608AY-USB,
AIO-160802AY-USB, AIO-160802GY-USB, (Analog
L series) |
1 - 33,554,432 |
(Analog
E Series) |
1 - 16,777,216 |
AD12-64(PCI),
AD12-16(PCI) |
1 - 4,294,967,295 |
AiStopTrgEdge Settable values
Analog input devices other than the following *3 |
0:
Falling Edge |
AD12-64(PCI),
AD12-16(PCI) |
0: Falling Edge |
AoStopTrgEdge Settable values
Analog output devices other than the following *3 |
0:
Falling Edge |
DA12-16(PCI),
DA12-8(PCI), DA12-4(PCI) |
0: Falling Edge |
*3 Only for the devices supported by DAQ-LV-WIN (There are products with no external trigger terminal on our analog device)
AiSamplingTimes Settable values
Analog
input devices other
than the following |
0 - 262,144/Ch (256*1024/Number of used Chs) |
(Analog
G series) |
0
- 134,217,728 /Ch |
(Analog
Z series PCI Express) |
0
- 1,073,741,824 /Ch *4 |
(Analog
Z series PCI) |
0
- 33,554,432/Ch *4 |
(Analog
F Series Board type) |
0 - 65,536/Ch (64*1024/Number of used Chs) |
(Analog
F Series USB type) |
0 - 131,072/Ch (128*1024/Number of used Chs) |
(Analog
E Series) |
0 - 16,777,216/Ch (16*1024*1024/Number of used Chs) |
*4 The maximum number when using 3 channels is the same as when using 4 channels
AoSamplingTimes Settable values
Analog
output devices other
than the following |
0 - 262,144/Ch (256*1024/Number of used Chs) |
(Analog
F Series Board type) |
0 - 65,536/Ch (64*1024/Number of used Chs) |
(Analog
F Series USB type) |
0 - 131,072/Ch (128*1024/Number of used Chs) |
If
you are using a new device released later than the version of
DAQ-LV-WIN, the setting information of the corresponding device
is not contained in this help. ・Settings
related to analog devices: API-AIO(WDM) |