With the Text settings tab, you can set the text, display position, and font to be displayed when the lamp is turned ON/OFF.
①TextType
Select the type of text to display on the lamp.
Item |
Description |
None |
Does not display text. |
BitNo |
Displays the bit No.. |
User |
Displays user-specified characters. |
②TextLocation
Specifies where to display the text.
Item |
Description |
Overlay |
It is displayed overlaid on the lamp image. Please note that text outside the range of the ramp image will not be displayed. |
UpperLeft |
It is displayed on the upper/left side of the lamp image. When the lamps are arranged horizontally, they are on the upper side, and when they are arranged vertically, they are on the left side. |
BottomRight |
It is displayed on the bottom/right side of the lamp image. When the lamps are arranged horizontally, they are on the bottom side, and when they are arranged vertically, they are on the right side. |
③TextPosition
Select the position to display the text from the following.
・TopLeft
・TopCenter
・TopRight
・MiddleLeft
・MiddleCenter
・MiddleRight
・BottomLeft
・BottomCenter
・BottomRight
④StartBitNumber
Specifies the bit start number. This is valid only when the bit number is selected as the text type.
⑤TextCoordinateX
Adjusts the X coordinate of the text display position.
⑥TextCoordinateY
Adjusts the Y coordinate of the text display position.
⑦TextOn
Enter the text to be displayed when ON.
This is valid only when user specification is selected for the text type.
⑧TextOnColor
Select the text color to be displayed when ON.
⑨TextOff
Enter the text to be displayed when OFF.
This is valid only when user specification is selected for the text type.
⑩TextOffColor
Select the text color to be displayed when OFF.
⑪Font
Select a text font.