Installing Device Driver

Installation instructions

1. Please install the device driver before installing the device (hardware).
   If you have already installed the device driver, please proceed to step 2.
   
   1-1. Extract the downloaded file in an appropriate location.
   1-2. Run Setup.exe in the following folder to install the device driver.
   
   <Extraction destination folder>
   For USB micro converters：\LZC147_WIN1USB_XXX\Usb\COM4CXUSB_forWin10\Setup.exe
   For USB units：\LZC147_WINXUSB_XXX\Usb\Com1Usb_forWin10\Setup.exe
   
   This is the installation screen for COM-DRV(WDM). Click [Next].
   
   
   Accept the license agreement and click [Next].
   
   
   When setup is complete, the installed device driver version is displayed.
   In this example, a USB unit is installed.
   

2.  Turn off your computer and install your hardware.
   Connect the device while the OS is running.

3. The device driver is installed automatically when the OS starts or when a USB device is plugged in.
   Please check the COM port before using the device (hardware).