Communication port settings such as baud rate (bit/s), data length (data bit), stop bit, parity, etc. can be set as a Windows OS standard function.
However, serial communication parameters are generally set within general-purpose package software (or application software).
Since many general-purpose software packages reset the communication parameters,
even if the communication settings are made using the OS standard functions as shown below, the contents will not be reflected.
For more information, please refer to the manual of the package software or contact the developer of the package software.
- Device Manager > Ports (COM & LPT) Properties
<Property example> * The display differs depending on the device used.
* The range of baud rate setting (bit/s) is the specification of Windows OS. This is different from the Setting Baud Rate that can be set for the device used.
- Run command prompt MODE command
<Property example> * The display differs depending on the device used.
