Error Code Details

• Common error code of each GPIB function

  Return Value	Error Contents Details
  0	Normality completion.
  1	Failed in retrieve resource.
  2	Failed in register interrupt routine.
  3	Failed in the allocation of the memory.
  4	Failed in the Access of the registry.
  7	Execute GpibResetDevice function because the device has recovered from standby mode.
  8	Initialization failed because cgpib.sys is not found
  9	Initialization failed because the file version of cgpib.dll cannot be acquired.
  10	Initialization failed because the file version of cgpib.sys cannot be acquired.
  11	Initialization failed because the file version of cgpib.dll is not same as cgpib.sys.
  10000	The device name was specified which wasn't registered.
  10001	Invalid ID was specified.
  10002	Driver can not be called.
  10003	Failed in the opening of the file.
  10004	Failed in the closing of the file.
  10005	Failed in the creation of the thread.
  10161	GpibInit : The 1st argument is NULL.
  10162	GpibInit : The 2st argument is NULL.
  10171	GpibInit : Address specification is wrong.
  10172	GpibInit : The function for slaves was performed at the time of master mode.
  10173	GpibInit : The function for masters was performed at the time of slave mode.
  10174	GpibInit : Failed in the opening of the event.
  10177	GpibInit : An applicable function is not in a device.
  10178	GpibInit : Failed in the allocation of the memory.
  10180	GpibInit : A file is not found.
  10181	GpibInit : There are too many opened files.
  10182	GpibInit : The file is locked.
  10183	GpibInit : The file is set only to reading.
  10184	GpibInit : An availability is not in a disk.
  10185	GpibInit : The empty file was specified.
  10186	GpibInit : It is the error about other file operations.
  10187	GpibInit : The character sequence given to a character sequence conversion function is too long.
  10189	GpibInit : Reverse status became effective by transmission and reception.
  10190	GpibInit : An asynchronous function is performing.
  10191	GpibInit : The asynchronous function was forced to terminate.
  10192	GpibInit : The forced-termination key was pushed.
  10193	GpibInit : An opening is not in arrangement.
  10194	GpibInit : It is a timeout error.
  10195	GpibInit : It is a GPIB error.
  10197	GpibInit : Other processes are using it.
  10251	GpibExit : The 1st argument is outside the setting range.
  10271	GpibExit : Address specification is wrong.
  10272	GpibExit : The function for slaves was performed at the time of master mode.
  10273	GpibExit : The function for masters was performed at the time of slave mode.
  10274	GpibExit : Failed in the opening of the event.
  10277	GpibExit : An applicable function is not in a device.
  10278	GpibExit : Failed in the allocation of the memory.
  10280	GpibExit : A file is not found.
  10281	GpibExit : There are too many opened files.
  10282	GpibExit : The file is locked.
  10283	GpibExit : The file is set only to reading.
  10284	GpibExit : An availability is not in a disk.
  10285	GpibExit : The empty file was specified.
  10286	GpibExit : It is the error about other file operations.
  10287	GpibExit : The character sequence given to a character sequence conversion function is too long.
  10289	GpibExit : Reverse status became effective by transmission and reception.
  10290	GpibExit : An asynchronous function is performing.
  10291	GpibExit : The asynchronous function was forced to terminate.
  10292	GpibExit : The forced-termination key was pushed.
  10293	GpibExit : An opening is not in arrangement.
  10294	GpibExit : It is a timeout error.
  10295	GpibExit : It is a GPIB error.
  10297	GpibExit : Other processes are using it.
  10301	GpibGetErrorString : The 1st argument is outside the setting range.
  10312	GpibGetErrorString : The 2st argument is NULL.
  10321	GpibGetErrorString : Address specification is wrong.
  10322	GpibGetErrorString : The function for slaves was performed at the time of master mode.
  10323	GpibGetErrorString : The function for masters was performed at the time of slave mode.
  10324	GpibGetErrorString : Failed in the opening of the event.
  10327	GpibGetErrorString : An applicable function is not in a device.
  10328	GpibGetErrorString : Failed in the allocation of the memory.
  10330	GpibGetErrorString : A file is not found.
  10331	GpibGetErrorString : There are too many opened files.
  10332	GpibGetErrorString : The file is locked.
  10333	GpibGetErrorString : The file is set only to reading.
  10334	GpibGetErrorString : An availability is not in a disk.
  10335	GpibGetErrorString : The empty file was specified.
  10336	GpibGetErrorString : It is the error about other file operations.
  10337	GpibGetErrorString : The character sequence given to a character sequence conversion function is too long.
  10339	GpibGetErrorString : Reverse status became effective by transmission and reception.
  10340	GpibGetErrorString : An asynchronous function is performing.
  10341	GpibGetErrorString : The asynchronous function was forced to terminate.
  10342	GpibGetErrorString : The forced-termination key was pushed.
  10343	GpibGetErrorString : An opening is not in arrangement.
  10344	GpibGetErrorString : It is a timeout error.
  10345	GpibGetErrorString : It is a GPIB error.
  10347	GpibGetErrorString : Other processes are using it.
  10451	GpibSetEquipment : The 1st argument is outside the setting range.
  10453	GpibSetEquipment : The 3rd argument is outside the setting range.
  10454	GpibSetEquipment : The 4th argument is outside the setting range.
  10455	GpibSetEquipment : The 5th argument is outside the setting range.
  10462	GpibSetEquipment : The 2st argument is NULL.
  10471	GpibSetEquipment : Address specification is wrong.
  10472	GpibSetEquipment : The function for slaves was performed at the time of master mode.
  10473	GpibSetEquipment : The function for masters was performed at the time of slave mode.
  10474	GpibSetEquipment : Failed in the opening of the event.
  10477	GpibSetEquipment : An applicable function is not in a device.
  10478	GpibSetEquipment : Failed in the allocation of the memory.
  10480	GpibSetEquipment : A file is not found.
  10481	GpibSetEquipment : There are too many opened files.
  10482	GpibSetEquipment : The file is locked.
  10483	GpibSetEquipment : The file is set only to reading.
  10484	GpibSetEquipment : An availability is not in a disk.
  10485	GpibSetEquipment : The empty file was specified.
  10486	GpibSetEquipment : It is the error about other file operations.
  10487	GpibSetEquipment : The character sequence given to a character sequence conversion function is too long.
  10489	GpibSetEquipment : Reverse status became effective by transmission and reception.
  10490	GpibSetEquipment : An asynchronous function is performing.
  10491	GpibSetEquipment : The asynchronous function was forced to terminate.
  10492	GpibSetEquipment : The forced-termination key was pushed.
  10493	GpibSetEquipment : An opening is not in arrangement.
  10494	GpibSetEquipment : It is a timeout error.
  10495	GpibSetEquipment : It is a GPIB error.
  10497	GpibSetEquipment : Other processes are using it.
  10501	GpibGetEquipment : The 1st argument is outside the setting range.
  10512	GpibGetEquipment : The 2st argument is NULL.
  10513	GpibGetEquipment : The 3st argument is NULL.
  10514	GpibGetEquipment : The 4st argument is NULL.
  10521	GpibGetEquipment : Address specification is wrong.
  10522	GpibGetEquipment : The function for slaves was performed at the time of master mode.
  10523	GpibGetEquipment : The function for masters was performed at the time of slave mode.
  10524	GpibGetEquipment : Failed in the opening of the event.
  10527	GpibGetEquipment : An applicable function is not in a device.
  10528	GpibGetEquipment : Failed in the allocation of the memory.
  10530	GpibGetEquipment : A file is not found.
  10531	GpibGetEquipment : There are too many opened files.
  10532	GpibGetEquipment : The file is locked.
  10533	GpibGetEquipment : The file is set only to reading.
  10534	GpibGetEquipment : An availability is not in a disk.
  10535	GpibGetEquipment : The empty file was specified.
  10536	GpibGetEquipment : It is the error about other file operations.
  10537	GpibGetEquipment : The character sequence given to a character sequence conversion function is too long.
  10539	GpibGetEquipment : Reverse status became effective by transmission and reception.
  10540	GpibGetEquipment : An asynchronous function is performing.
  10541	GpibGetEquipment : The asynchronous function was forced to terminate.
  10542	GpibGetEquipment : The forced-termination key was pushed.
  10543	GpibGetEquipment : An opening is not in arrangement.
  10544	GpibGetEquipment : It is a timeout error.
  10545	GpibGetEquipment : It is a GPIB error.
  10547	GpibGetEquipment : Other processes are using it.
  10551	GpibSendIFC : The 1st argument is outside the setting range.
  10552	GpibSendIFC : The 2nd argument is outside the setting range.
  10571	GpibSendIFC : Address specification is wrong.
  10572	GpibSendIFC : The function for slaves was performed at the time of master mode.
  10573	GpibSendIFC : The function for masters was performed at the time of slave mode.
  10574	GpibSendIFC : Failed in the opening of the event.
  10577	GpibSendIFC : An applicable function is not in a device.
  10578	GpibSendIFC : Failed in the allocation of the memory.
  10580	GpibSendIFC : A file is not found.
  10581	GpibSendIFC : There are too many opened files.
  10582	GpibSendIFC : The file is locked.
  10583	GpibSendIFC : The file is set only to reading.
  10584	GpibSendIFC : An availability is not in a disk.
  10585	GpibSendIFC : The empty file was specified.
  10586	GpibSendIFC : It is the error about other file operations.
  10587	GpibSendIFC : The character sequence given to a character sequence conversion function is too long.
  10589	GpibSendIFC : Reverse status became effective by transmission and reception.
  10590	GpibSendIFC : An asynchronous function is performing.
  10591	GpibSendIFC : The asynchronous function was forced to terminate.
  10592	GpibSendIFC : The forced-termination key was pushed.
  10593	GpibSendIFC : An opening is not in arrangement.
  10594	GpibSendIFC : It is a timeout error.
  10595	GpibSendIFC : It is a GPIB error.
  10597	GpibSendIFC : Other processes are using it.
  10601	GpibChangeREN : The 1st argument is outside the setting range.
  10602	GpibChangeREN : The 2nd argument is outside the setting range.
  10621	GpibChangeREN : Address specification is wrong.
  10622	GpibChangeREN : The function for slaves was performed at the time of master mode.
  10623	GpibChangeREN : The function for masters was performed at the time of slave mode.
  10624	GpibChangeREN : Failed in the opening of the event.
  10627	GpibChangeREN : An applicable function is not in a device.
  10628	GpibChangeREN : Failed in the allocation of the memory.
  10630	GpibChangeREN : A file is not found.
  10631	GpibChangeREN : There are too many opened files.
  10632	GpibChangeREN : The file is locked.
  10633	GpibChangeREN : The file is set only to reading.
  10634	GpibChangeREN : An availability is not in a disk.
  10635	GpibChangeREN : The empty file was specified.
  10636	GpibChangeREN : It is the error about other file operations.
  10637	GpibChangeREN : The character sequence given to a character sequence conversion function is too long.
  10639	GpibChangeREN : Reverse status became effective by transmission and reception.
  10640	GpibChangeREN : An asynchronous function is performing.
  10641	GpibChangeREN : The asynchronous function was forced to terminate.
  10642	GpibChangeREN : The forced-termination key was pushed.
  10643	GpibChangeREN : An opening is not in arrangement.
  10644	GpibChangeREN : It is a timeout error.
  10645	GpibChangeREN : It is a GPIB error.
  10647	GpibChangeREN : Other processes are using it.
  10651	GpibEnableRemote : The 1st argument is outside the setting range.
  10671	GpibEnableRemote : Address specification is wrong.
  10672	GpibEnableRemote : The function for slaves was performed at the time of master mode.
  10673	GpibEnableRemote : The function for masters was performed at the time of slave mode.
  10674	GpibEnableRemote : Failed in the opening of the event.
  10677	GpibEnableRemote : An applicable function is not in a device.
  10678	GpibEnableRemote : Failed in the allocation of the memory.
  10680	GpibEnableRemote : A file is not found.
  10681	GpibEnableRemote : There are too many opened files.
  10682	GpibEnableRemote : The file is locked.
  10683	GpibEnableRemote : The file is set only to reading.
  10684	GpibEnableRemote : An availability is not in a disk.
  10685	GpibEnableRemote : The empty file was specified.
  10686	GpibEnableRemote : It is the error about other file operations.
  10687	GpibEnableRemote : The character sequence given to a character sequence conversion function is too long.
  10689	GpibEnableRemote : Reverse status became effective by transmission and reception.
  10690	GpibEnableRemote : An asynchronous function is performing.
  10691	GpibEnableRemote : The asynchronous function was forced to terminate.
  10692	GpibEnableRemote : The forced-termination key was pushed.
  10693	GpibEnableRemote : An opening is not in arrangement.
  10694	GpibEnableRemote : It is a timeout error.
  10695	GpibEnableRemote : It is a GPIB error.
  10697	GpibEnableRemote : Other processes are using it.
  10901	GpibSendData : The 1st argument is outside the setting range.
  10912	GpibSendData : The 2st argument is NULL.
  10913	GpibSendData : The 3st argument is NULL.
  10921	GpibSendData : Address specification is wrong.
  10922	GpibSendData : The function for slaves was performed at the time of master mode.
  10923	GpibSendData : The function for masters was performed at the time of slave mode.
  10924	GpibSendData : Failed in the opening of the event.
  10927	GpibSendData : An applicable function is not in a device.
  10928	GpibSendData : Failed in the allocation of the memory.
  10930	GpibSendData : A file is not found.
  10931	GpibSendData : There are too many opened files.
  10932	GpibSendData : The file is locked.
  10933	GpibSendData : The file is set only to reading.
  10934	GpibSendData : An availability is not in a disk.
  10935	GpibSendData : The empty file was specified.
  10936	GpibSendData : It is the error about other file operations.
  10937	GpibSendData : The character sequence given to a character sequence conversion function is too long.
  10939	GpibSendData : Reverse status became effective by transmission and reception.
  10940	GpibSendData : An asynchronous function is performing.
  10941	GpibSendData : The asynchronous function was forced to terminate.
  10942	GpibSendData : The forced-termination key was pushed.
  10943	GpibSendData : An opening is not in arrangement.
  10944	GpibSendData : It is a timeout error.
  10945	GpibSendData : It is a GPIB error.
  10947	GpibSendData : Other processes are using it.
  10951	GpibRecData : The 1st argument is outside the setting range.
  10962	GpibRecData : The 2st argument is NULL.
  10963	GpibRecData : The 3st argument is NULL.
  10971	GpibRecData : Address specification is wrong.
  10972	GpibRecData : The function for slaves was performed at the time of master mode.
  10973	GpibRecData : The function for masters was performed at the time of slave mode.
  10974	GpibRecData : Failed in the opening of the event.
  10977	GpibRecData : An applicable function is not in a device.
  10978	GpibRecData : Failed in the allocation of the memory.
  10980	GpibRecData : A file is not found.
  10981	GpibRecData : There are too many opened files.
  10982	GpibRecData : The file is locked.
  10983	GpibRecData : The file is set only to reading.
  10984	GpibRecData : An availability is not in a disk.
  10985	GpibRecData : The empty file was specified.
  10986	GpibRecData : It is the error about other file operations.
  10987	GpibRecData : The character sequence given to a character sequence conversion function is too long.
  10989	GpibRecData : Reverse status became effective by transmission and reception.
  10990	GpibRecData : An asynchronous function is performing.
  10991	GpibRecData : The asynchronous function was forced to terminate.
  10992	GpibRecData : The forced-termination key was pushed.
  10993	GpibRecData : An opening is not in arrangement.
  10994	GpibRecData : It is a timeout error.
  10995	GpibRecData : It is a GPIB error.
  10997	GpibRecData : Other processes are using it.
  11301	GpibSetDelim : The 1st argument is outside the setting range.
  11302	GpibSetDelim : The 2nd argument is outside the setting range.
  11303	GpibSetDelim : The 3rd argument is outside the setting range.
  11304	GpibSetDelim : The 4th argument is outside the setting range.
  11321	GpibSetDelim : Address specification is wrong.
  11322	GpibSetDelim : The function for slaves was performed at the time of master mode.
  11323	GpibSetDelim : The function for masters was performed at the time of slave mode.
  11324	GpibSetDelim : Failed in the opening of the event.
  11327	GpibSetDelim : An applicable function is not in a device.
  11328	GpibSetDelim : Failed in the allocation of the memory.
  11330	GpibSetDelim : A file is not found.
  11331	GpibSetDelim : There are too many opened files.
  11332	GpibSetDelim : The file is locked.
  11333	GpibSetDelim : The file is set only to reading.
  11334	GpibSetDelim : An availability is not in a disk.
  11335	GpibSetDelim : The empty file was specified.
  11336	GpibSetDelim : It is the error about other file operations.
  11337	GpibSetDelim : The character sequence given to a character sequence conversion function is too long.
  11339	GpibSetDelim : Reverse status became effective by transmission and reception.
  11340	GpibSetDelim : An asynchronous function is performing.
  11341	GpibSetDelim : The asynchronous function was forced to terminate.
  11342	GpibSetDelim : The forced-termination key was pushed.
  11343	GpibSetDelim : An opening is not in arrangement.
  11344	GpibSetDelim : It is a timeout error.
  11345	GpibSetDelim : It is a GPIB error.
  11347	GpibSetDelim : Other processes are using it.
  11351	GpibGetDelim : The 1st argument is outside the setting range.
  11362	GpibGetDelim : The 2st argument is NULL.
  11363	GpibGetDelim : The 3st argument is NULL.
  11364	GpibGetDelim : The 4st argument is NULL.
  11371	GpibGetDelim : Address specification is wrong.
  11372	GpibGetDelim : The function for slaves was performed at the time of master mode.
  11373	GpibGetDelim : The function for masters was performed at the time of slave mode.
  11374	GpibGetDelim : Failed in the opening of the event.
  11377	GpibGetDelim : An applicable function is not in a device.
  11378	GpibGetDelim : Failed in the allocation of the memory.
  11380	GpibGetDelim : A file is not found.
  11381	GpibGetDelim : There are too many opened files.
  11382	GpibGetDelim : The file is locked.
  11383	GpibGetDelim : The file is set only to reading.
  11384	GpibGetDelim : An availability is not in a disk.
  11385	GpibGetDelim : The empty file was specified.
  11386	GpibGetDelim : It is the error about other file operations.
  11387	GpibGetDelim : The character sequence given to a character sequence conversion function is too long.
  11389	GpibGetDelim : Reverse status became effective by transmission and reception.
  11390	GpibGetDelim : An asynchronous function is performing.
  11391	GpibGetDelim : The asynchronous function was forced to terminate.
  11392	GpibGetDelim : The forced-termination key was pushed.
  11393	GpibGetDelim : An opening is not in arrangement.
  11394	GpibGetDelim : It is a timeout error.
  11395	GpibGetDelim : It is a GPIB error.
  11397	GpibGetDelim : Other processes are using it.
  11401	GpibSetTimeOut : The 1st argument is outside the setting range.
  11402	GpibSetTimeOut : The 2nd argument is outside the setting range.
  11421	GpibSetTimeOut : Address specification is wrong.
  11422	GpibSetTimeOut : The function for slaves was performed at the time of master mode.
  11423	GpibSetTimeOut : The function for masters was performed at the time of slave mode.
  11424	GpibSetTimeOut : Failed in the opening of the event.
  11427	GpibSetTimeOut : An applicable function is not in a device.
  11428	GpibSetTimeOut : Failed in the allocation of the memory.
  11430	GpibSetTimeOut : A file is not found.
  11431	GpibSetTimeOut : There are too many opened files.
  11432	GpibSetTimeOut : The file is locked.
  11433	GpibSetTimeOut : The file is set only to reading.
  11434	GpibSetTimeOut : An availability is not in a disk.
  11435	GpibSetTimeOut : The empty file was specified.
  11436	GpibSetTimeOut : It is the error about other file operations.
  11437	GpibSetTimeOut : The character sequence given to a character sequence conversion function is too long.
  11439	GpibSetTimeOut : Reverse status became effective by transmission and reception.
  11440	GpibSetTimeOut : An asynchronous function is performing.
  11441	GpibSetTimeOut : The asynchronous function was forced to terminate.
  11442	GpibSetTimeOut : The forced-termination key was pushed.
  11443	GpibSetTimeOut : An opening is not in arrangement.
  11444	GpibSetTimeOut : It is a timeout error.
  11445	GpibSetTimeOut : It is a GPIB error.
  11447	GpibSetTimeOut : Other processes are using it.
  11451	GpibGetTimeOut : The 1st argument is outside the setting range.
  11462	GpibGetTimeOut : The 2st argument is NULL.
  11471	GpibGetTimeOut : Address specification is wrong.
  11472	GpibGetTimeOut : The function for slaves was performed at the time of master mode.
  11473	GpibGetTimeOut : The function for masters was performed at the time of slave mode.
  11474	GpibGetTimeOut : Failed in the opening of the event.
  11477	GpibGetTimeOut : An applicable function is not in a device.
  11478	GpibGetTimeOut : Failed in the allocation of the memory.
  11480	GpibGetTimeOut : A file is not found.
  11481	GpibGetTimeOut : There are too many opened files.
  11482	GpibGetTimeOut : The file is locked.
  11483	GpibGetTimeOut : The file is set only to reading.
  11484	GpibGetTimeOut : An availability is not in a disk.
  11485	GpibGetTimeOut : The empty file was specified.
  11486	GpibGetTimeOut : It is the error about other file operations.
  11487	GpibGetTimeOut : The character sequence given to a character sequence conversion function is too long.
  11489	GpibGetTimeOut : Reverse status became effective by transmission and reception.
  11490	GpibGetTimeOut : An asynchronous function is performing.
  11491	GpibGetTimeOut : The asynchronous function was forced to terminate.
  11492	GpibGetTimeOut : The forced-termination key was pushed.
  11493	GpibGetTimeOut : An opening is not in arrangement.
  11494	GpibGetTimeOut : It is a timeout error.
  11495	GpibGetTimeOut : It is a GPIB error.
  11497	GpibGetTimeOut : Other processes are using it.
  11701	GpibSetSlowMode : The 1st argument is outside the setting range.
  11702	GpibSetSlowMode : The 2nd argument is outside the setting range.
  11751	GpibGetSlowMode : The 1st argument is outside the setting range.
  11762	GpibGetSlowMode : The 2st argument is NULL.
  11771	GpibGetSlowMode : Address specification is wrong.
  11772	GpibGetSlowMode : The function for slaves was performed at the time of master mode.
  11773	GpibGetSlowMode : The function for masters was performed at the time of slave mode.
  11774	GpibGetSlowMode : Failed in the opening of the event.
  11777	GpibGetSlowMode : An applicable function is not in a device.
  11778	GpibGetSlowMode : Failed in the allocation of the memory.
  11780	GpibGetSlowMode : A file is not found.
  11781	GpibGetSlowMode : There are too many opened files.
  11782	GpibGetSlowMode : The file is locked.
  11783	GpibGetSlowMode : The file is set only to reading.
  11784	GpibGetSlowMode : An availability is not in a disk.
  11785	GpibGetSlowMode : The empty file was specified.
  11786	GpibGetSlowMode : It is the error about other file operations.
  11787	GpibGetSlowMode : The character sequence given to a character sequence conversion function is too long.
  11789	GpibGetSlowMode : Reverse status became effective by transmission and reception.
  11790	GpibGetSlowMode : An asynchronous function is performing.
  11791	GpibGetSlowMode : The asynchronous function was forced to terminate.
  11792	GpibGetSlowMode : The forced-termination key was pushed.
  11793	GpibGetSlowMode : An opening is not in arrangement.
  11794	GpibGetSlowMode : It is a timeout error.
  11795	GpibGetSlowMode : It is a GPIB error.
  11797	GpibGetSlowMode : Other processes are using it.
  12001	GpibSetAddrInfo : The 1st argument is outside the setting range.
  12002	GpibSetAddrInfo : The 2nd argument is outside the setting range.
  12013	GpibSetAddrInfo : The 3st argument is NULL.
  12021	GpibSetAddrInfo : Address specification is wrong.
  12022	GpibSetAddrInfo : The function for slaves was performed at the time of master mode.
  12023	GpibSetAddrInfo : The function for masters was performed at the time of slave mode.
  12024	GpibSetAddrInfo : Failed in the opening of the event.
  12027	GpibSetAddrInfo : An applicable function is not in a device.
  12028	GpibSetAddrInfo : Failed in the allocation of the memory.
  12030	GpibSetAddrInfo : A file is not found.
  12031	GpibSetAddrInfo : There are too many opened files.
  12032	GpibSetAddrInfo : The file is locked.
  12033	GpibSetAddrInfo : The file is set only to reading.
  12034	GpibSetAddrInfo : An availability is not in a disk.
  12035	GpibSetAddrInfo : The empty file was specified.
  12036	GpibSetAddrInfo : It is the error about other file operations.
  12037	GpibSetAddrInfo : The character sequence given to a character sequence conversion function is too long.
  12039	GpibSetAddrInfo : Reverse status became effective by transmission and reception.
  12040	GpibSetAddrInfo : An asynchronous function is performing.
  12041	GpibSetAddrInfo : The asynchronous function was forced to terminate.
  12042	GpibSetAddrInfo : The forced-termination key was pushed.
  12043	GpibSetAddrInfo : An opening is not in arrangement.
  12044	GpibSetAddrInfo : It is a timeout error.
  12045	GpibSetAddrInfo : It is a GPIB error.
  12047	GpibSetAddrInfo : Other processes are using it.
  12051	GpibGetAddrInfo : The 1st argument is outside the setting range.
  12062	GpibGetAddrInfo : The 2st argument is NULL.
  12063	GpibGetAddrInfo : The 3st argument is NULL.
  12071	GpibGetAddrInfo : Address specification is wrong.
  12072	GpibGetAddrInfo : The function for slaves was performed at the time of master mode.
  12073	GpibGetAddrInfo : The function for masters was performed at the time of slave mode.
  12074	GpibGetAddrInfo : Failed in the opening of the event.
  12077	GpibGetAddrInfo : An applicable function is not in a device.
  12078	GpibGetAddrInfo : Failed in the allocation of the memory.
  12080	GpibGetAddrInfo : A file is not found.
  12081	GpibGetAddrInfo : There are too many opened files.
  12082	GpibGetAddrInfo : The file is locked.
  12083	GpibGetAddrInfo : The file is set only to reading.
  12084	GpibGetAddrInfo : An availability is not in a disk.
  12085	GpibGetAddrInfo : The empty file was specified.
  12086	GpibGetAddrInfo : It is the error about other file operations.
  12087	GpibGetAddrInfo : The character sequence given to a character sequence conversion function is too long.
  12089	GpibGetAddrInfo : Reverse status became effective by transmission and reception.
  12090	GpibGetAddrInfo : An asynchronous function is performing.
  12091	GpibGetAddrInfo : The asynchronous function was forced to terminate.
  12092	GpibGetAddrInfo : The forced-termination key was pushed.
  12093	GpibGetAddrInfo : An opening is not in arrangement.
  12094	GpibGetAddrInfo : It is a timeout error.
  12095	GpibGetAddrInfo : It is a GPIB error.
  12097	GpibGetAddrInfo : Other processes are using it.
  12101	GpibSPoll : The 1st argument is outside the setting range.
  12112	GpibSPoll : The 2st argument is NULL.
  12113	GpibSPoll : The 3st argument is NULL.
  12121	GpibSPoll : Address specification is wrong.
  12122	GpibSPoll : The function for slaves was performed at the time of master mode.
  12123	GpibSPoll : The function for masters was performed at the time of slave mode.
  12124	GpibSPoll : Failed in the opening of the event.
  12127	GpibSPoll : An applicable function is not in a device.
  12128	GpibSPoll : Failed in the allocation of the memory.
  12130	GpibSPoll : A file is not found.
  12131	GpibSPoll : There are too many opened files.
  12132	GpibSPoll : The file is locked.
  12133	GpibSPoll : The file is set only to reading.
  12134	GpibSPoll : An availability is not in a disk.
  12135	GpibSPoll : The empty file was specified.
  12136	GpibSPoll : It is the error about other file operations.
  12137	GpibSPoll : The character sequence given to a character sequence conversion function is too long.
  12139	GpibSPoll : Reverse status became effective by transmission and reception.
  12140	GpibSPoll : An asynchronous function is performing.
  12141	GpibSPoll : The asynchronous function was forced to terminate.
  12142	GpibSPoll : The forced-termination key was pushed.
  12143	GpibSPoll : An opening is not in arrangement.
  12144	GpibSPoll : It is a timeout error.
  12145	GpibSPoll : It is a GPIB error.
  12147	GpibSPoll : Other processes are using it.
  12151	GpibSPollAll : The 1st argument is outside the setting range.
  12162	GpibSPollAll : The 2st argument is NULL.
  12163	GpibSPollAll : The 3st argument is NULL.
  12164	GpibSPollAll : The 4st argument is NULL.
  12171	GpibSPollAll : Address specification is wrong.
  12172	GpibSPollAll : The function for slaves was performed at the time of master mode.
  12173	GpibSPollAll : The function for masters was performed at the time of slave mode.
  12174	GpibSPollAll : Failed in the opening of the event.
  12177	GpibSPollAll : An applicable function is not in a device.
  12178	GpibSPollAll : Failed in the allocation of the memory.
  12180	GpibSPollAll : A file is not found.
  12181	GpibSPollAll : There are too many opened files.
  12182	GpibSPollAll : The file is locked.
  12183	GpibSPollAll : The file is set only to reading.
  12184	GpibSPollAll : An availability is not in a disk.
  12185	GpibSPollAll : The empty file was specified.
  12186	GpibSPollAll : It is the error about other file operations.
  12187	GpibSPollAll : The character sequence given to a character sequence conversion function is too long.
  12189	GpibSPollAll : Reverse status became effective by transmission and reception.
  12190	GpibSPollAll : An asynchronous function is performing.
  12191	GpibSPollAll : The asynchronous function was forced to terminate.
  12192	GpibSPollAll : The forced-termination key was pushed.
  12193	GpibSPollAll : An opening is not in arrangement.
  12194	GpibSPollAll : It is a timeout error.
  12195	GpibSPollAll : It is a GPIB error.
  12197	GpibSPollAll : Other processes are using it.
  12201	GpibPPoll : The 1st argument is outside the setting range.
  12212	GpibPPoll : The 2st argument is NULL.
  12221	GpibPPoll : Address specification is wrong.
  12222	GpibPPoll : The function for slaves was performed at the time of master mode.
  12223	GpibPPoll : The function for masters was performed at the time of slave mode.
  12224	GpibPPoll : Failed in the opening of the event.
  12227	GpibPPoll : An applicable function is not in a device.
  12228	GpibPPoll : Failed in the allocation of the memory.
  12230	GpibPPoll : A file is not found.
  12231	GpibPPoll : There are too many opened files.
  12232	GpibPPoll : The file is locked.
  12233	GpibPPoll : The file is set only to reading.
  12234	GpibPPoll : An availability is not in a disk.
  12235	GpibPPoll : The empty file was specified.
  12236	GpibPPoll : It is the error about other file operations.
  12237	GpibPPoll : The character sequence given to a character sequence conversion function is too long.
  12239	GpibPPoll : Reverse status became effective by transmission and reception.
  12240	GpibPPoll : An asynchronous function is performing.
  12241	GpibPPoll : The asynchronous function was forced to terminate.
  12242	GpibPPoll : The forced-termination key was pushed.
  12243	GpibPPoll : An opening is not in arrangement.
  12244	GpibPPoll : It is a timeout error.
  12245	GpibPPoll : It is a GPIB error.
  12247	GpibPPoll : Other processes are using it.
  12251	GpibSetPPoll : The 1st argument is outside the setting range.
  12262	GpibSetPPoll : The 2st argument is NULL.
  12263	GpibSetPPoll : The 3st argument is NULL.
  12264	GpibSetPPoll : The 4st argument is NULL.
  12271	GpibSetPPoll : Address specification is wrong.
  12272	GpibSetPPoll : The function for slaves was performed at the time of master mode.
  12273	GpibSetPPoll : The function for masters was performed at the time of slave mode.
  12274	GpibSetPPoll : Failed in the opening of the event.
  12277	GpibSetPPoll : An applicable function is not in a device.
  12278	GpibSetPPoll : Failed in the allocation of the memory.
  12280	GpibSetPPoll : A file is not found.
  12281	GpibSetPPoll : There are too many opened files.
  12282	GpibSetPPoll : The file is locked.
  12283	GpibSetPPoll : The file is set only to reading.
  12284	GpibSetPPoll : An availability is not in a disk.
  12285	GpibSetPPoll : The empty file was specified.
  12286	GpibSetPPoll : It is the error about other file operations.
  12287	GpibSetPPoll : The character sequence given to a character sequence conversion function is too long.
  12289	GpibSetPPoll : Reverse status became effective by transmission and reception.
  12290	GpibSetPPoll : An asynchronous function is performing.
  12291	GpibSetPPoll : The asynchronous function was forced to terminate.
  12292	GpibSetPPoll : The forced-termination key was pushed.
  12293	GpibSetPPoll : An opening is not in arrangement.
  12294	GpibSetPPoll : It is a timeout error.
  12295	GpibSetPPoll : It is a GPIB error.
  12297	GpibSetPPoll : Other processes are using it.
  12301	GpibGetPPoll : The 1st argument is outside the setting range.
  12312	GpibGetPPoll : The 2st argument is NULL.
  12313	GpibGetPPoll : The 3st argument is NULL.
  12314	GpibGetPPoll : The 4st argument is NULL.
  12321	GpibGetPPoll : Address specification is wrong.
  12322	GpibGetPPoll : The function for slaves was performed at the time of master mode.
  12323	GpibGetPPoll : The function for masters was performed at the time of slave mode.
  12324	GpibGetPPoll : Failed in the opening of the event.
  12327	GpibGetPPoll : An applicable function is not in a device.
  12328	GpibGetPPoll : Failed in the allocation of the memory.
  12330	GpibGetPPoll : A file is not found.
  12331	GpibGetPPoll : There are too many opened files.
  12332	GpibGetPPoll : The file is locked.
  12333	GpibGetPPoll : The file is set only to reading.
  12334	GpibGetPPoll : An availability is not in a disk.
  12335	GpibGetPPoll : The empty file was specified.
  12336	GpibGetPPoll : It is the error about other file operations.
  12337	GpibGetPPoll : The character sequence given to a character sequence conversion function is too long.
  12339	GpibGetPPoll : Reverse status became effective by transmission and reception.
  12340	GpibGetPPoll : An asynchronous function is performing.
  12341	GpibGetPPoll : The asynchronous function was forced to terminate.
  12342	GpibGetPPoll : The forced-termination key was pushed.
  12343	GpibGetPPoll : An opening is not in arrangement.
  12344	GpibGetPPoll : It is a timeout error.
  12345	GpibGetPPoll : It is a GPIB error.
  12347	GpibGetPPoll : Other processes are using it.
  12351	GpibResetPPoll : The 1st argument is outside the setting range.
  12362	GpibResetPPoll : The 2st argument is NULL.
  12371	GpibResetPPoll : Address specification is wrong.
  12372	GpibResetPPoll : The function for slaves was performed at the time of master mode.
  12373	GpibResetPPoll : The function for masters was performed at the time of slave mode.
  12374	GpibResetPPoll : Failed in the opening of the event.
  12377	GpibResetPPoll : An applicable function is not in a device.
  12378	GpibResetPPoll : Failed in the allocation of the memory.
  12380	GpibResetPPoll : A file is not found.
  12381	GpibResetPPoll : There are too many opened files.
  12382	GpibResetPPoll : The file is locked.
  12383	GpibResetPPoll : The file is set only to reading.
  12384	GpibResetPPoll : An availability is not in a disk.
  12385	GpibResetPPoll : The empty file was specified.
  12386	GpibResetPPoll : It is the error about other file operations.
  12387	GpibResetPPoll : The character sequence given to a character sequence conversion function is too long.
  12389	GpibResetPPoll : Reverse status became effective by transmission and reception.
  12390	GpibResetPPoll : An asynchronous function is performing.
  12391	GpibResetPPoll : The asynchronous function was forced to terminate.
  12392	GpibResetPPoll : The forced-termination key was pushed.
  12393	GpibResetPPoll : An opening is not in arrangement.
  12394	GpibResetPPoll : It is a timeout error.
  12395	GpibResetPPoll : It is a GPIB error.
  12397	GpibResetPPoll : Other processes are using it.
  12401	GpibSetPPollResponse : The 1st argument is outside the setting range.
  12402	GpibSetPPollResponse : The 2nd argument is outside the setting range.
  12421	GpibSetPPollResponse : Address specification is wrong.
  12422	GpibSetPPollResponse : The function for slaves was performed at the time of master mode.
  12423	GpibSetPPollResponse : The function for masters was performed at the time of slave mode.
  12424	GpibSetPPollResponse : Failed in the opening of the event.
  12427	GpibSetPPollResponse : An applicable function is not in a device.
  12428	GpibSetPPollResponse : Failed in the allocation of the memory.
  12430	GpibSetPPollResponse : A file is not found.
  12431	GpibSetPPollResponse : There are too many opened files.
  12432	GpibSetPPollResponse : The file is locked.
  12433	GpibSetPPollResponse : The file is set only to reading.
  12434	GpibSetPPollResponse : An availability is not in a disk.
  12435	GpibSetPPollResponse : The empty file was specified.
  12436	GpibSetPPollResponse : It is the error about other file operations.
  12437	GpibSetPPollResponse : The character sequence given to a character sequence conversion function is too long.
  12439	GpibSetPPollResponse : Reverse status became effective by transmission and reception.
  12440	GpibSetPPollResponse : An asynchronous function is performing.
  12441	GpibSetPPollResponse : The asynchronous function was forced to terminate.
  12442	GpibSetPPollResponse : The forced-termination key was pushed.
  12443	GpibSetPPollResponse : An opening is not in arrangement.
  12444	GpibSetPPollResponse : It is a timeout error.
  12445	GpibSetPPollResponse : It is a GPIB error.
  12447	GpibSetPPollResponse : Other processes are using it.
  12451	GpibGetPPollResponse : The 1st argument is outside the setting range.
  12462	GpibGetPPollResponse : The 2st argument is NULL.
  12471	GpibGetPPollResponse : Address specification is wrong.
  12472	GpibGetPPollResponse : The function for slaves was performed at the time of master mode.
  12473	GpibGetPPollResponse : The function for masters was performed at the time of slave mode.
  12474	GpibGetPPollResponse : Failed in the opening of the event.
  12477	GpibGetPPollResponse : An applicable function is not in a device.
  12478	GpibGetPPollResponse : Failed in the allocation of the memory.
  12480	GpibGetPPollResponse : A file is not found.
  12481	GpibGetPPollResponse : There are too many opened files.
  12482	GpibGetPPollResponse : The file is locked.
  12483	GpibGetPPollResponse : The file is set only to reading.
  12484	GpibGetPPollResponse : An availability is not in a disk.
  12485	GpibGetPPollResponse : The empty file was specified.
  12486	GpibGetPPollResponse : It is the error about other file operations.
  12487	GpibGetPPollResponse : The character sequence given to a character sequence conversion function is too long.
  12489	GpibGetPPollResponse : Reverse status became effective by transmission and reception.
  12490	GpibGetPPollResponse : An asynchronous function is performing.
  12491	GpibGetPPollResponse : The asynchronous function was forced to terminate.
  12492	GpibGetPPollResponse : The forced-termination key was pushed.
  12493	GpibGetPPollResponse : An opening is not in arrangement.
  12494	GpibGetPPollResponse : It is a timeout error.
  12495	GpibGetPPollResponse : It is a GPIB error.
  12497	GpibGetPPollResponse : Other processes are using it.
  12501	GpibSetIst : The 1st argument is outside the setting range.
  12502	GpibSetIst : The 2nd argument is outside the setting range.
  12521	GpibSetIst : Address specification is wrong.
  12522	GpibSetIst : The function for slaves was performed at the time of master mode.
  12523	GpibSetIst : The function for masters was performed at the time of slave mode.
  12524	GpibSetIst : Failed in the opening of the event.
  12527	GpibSetIst : An applicable function is not in a device.
  12528	GpibSetIst : Failed in the allocation of the memory.
  12530	GpibSetIst : A file is not found.
  12531	GpibSetIst : There are too many opened files.
  12532	GpibSetIst : The file is locked.
  12533	GpibSetIst : The file is set only to reading.
  12534	GpibSetIst : An availability is not in a disk.
  12535	GpibSetIst : The empty file was specified.
  12536	GpibSetIst : It is the error about other file operations.
  12537	GpibSetIst : The character sequence given to a character sequence conversion function is too long.
  12539	GpibSetIst : Reverse status became effective by transmission and reception.
  12540	GpibSetIst : An asynchronous function is performing.
  12541	GpibSetIst : The asynchronous function was forced to terminate.
  12542	GpibSetIst : The forced-termination key was pushed.
  12543	GpibSetIst : An opening is not in arrangement.
  12544	GpibSetIst : It is a timeout error.
  12545	GpibSetIst : It is a GPIB error.
  12547	GpibSetIst : Other processes are using it.
  12551	GpibGetIst : The 1st argument is outside the setting range.
  12562	GpibGetIst : The 2st argument is NULL.
  12571	GpibGetIst : Address specification is wrong.
  12572	GpibGetIst : The function for slaves was performed at the time of master mode.
  12573	GpibGetIst : The function for masters was performed at the time of slave mode.
  12574	GpibGetIst : Failed in the opening of the event.
  12577	GpibGetIst : An applicable function is not in a device.
  12578	GpibGetIst : Failed in the allocation of the memory.
  12580	GpibGetIst : A file is not found.
  12581	GpibGetIst : There are too many opened files.
  12582	GpibGetIst : The file is locked.
  12583	GpibGetIst : The file is set only to reading.
  12584	GpibGetIst : An availability is not in a disk.
  12585	GpibGetIst : The empty file was specified.
  12586	GpibGetIst : It is the error about other file operations.
  12587	GpibGetIst : The character sequence given to a character sequence conversion function is too long.
  12589	GpibGetIst : Reverse status became effective by transmission and reception.
  12590	GpibGetIst : An asynchronous function is performing.
  12591	GpibGetIst : The asynchronous function was forced to terminate.
  12592	GpibGetIst : The forced-termination key was pushed.
  12593	GpibGetIst : An opening is not in arrangement.
  12594	GpibGetIst : It is a timeout error.
  12595	GpibGetIst : It is a GPIB error.
  12597	GpibGetIst : Other processes are using it.
  12601	GpibSendSRQ : The 1st argument is outside the setting range.
  12602	GpibSendSRQ : The 2nd argument is outside the setting range.
  12603	GpibSendSRQ : The 3rd argument is outside the setting range.
  12621	GpibSendSRQ : Address specification is wrong.
  12622	GpibSendSRQ : The function for slaves was performed at the time of master mode.
  12623	GpibSendSRQ : The function for masters was performed at the time of slave mode.
  12624	GpibSendSRQ : Failed in the opening of the event.
  12627	GpibSendSRQ : An applicable function is not in a device.
  12628	GpibSendSRQ : Failed in the allocation of the memory.
  12630	GpibSendSRQ : A file is not found.
  12631	GpibSendSRQ : There are too many opened files.
  12632	GpibSendSRQ : The file is locked.
  12633	GpibSendSRQ : The file is set only to reading.
  12634	GpibSendSRQ : An availability is not in a disk.
  12635	GpibSendSRQ : The empty file was specified.
  12636	GpibSendSRQ : It is the error about other file operations.
  12637	GpibSendSRQ : The character sequence given to a character sequence conversion function is too long.
  12639	GpibSendSRQ : Reverse status became effective by transmission and reception.
  12640	GpibSendSRQ : An asynchronous function is performing.
  12641	GpibSendSRQ : The asynchronous function was forced to terminate.
  12642	GpibSendSRQ : The forced-termination key was pushed.
  12643	GpibSendSRQ : An opening is not in arrangement.
  12644	GpibSendSRQ : It is a timeout error.
  12645	GpibSendSRQ : It is a GPIB error.
  12647	GpibSendSRQ : Other processes are using it.
  12651	GpibCheckSPoll : The 1st argument is outside the setting range.
  12662	GpibCheckSPoll : The 2st argument is NULL.
  12663	GpibCheckSPoll : The 3st argument is NULL.
  12671	GpibCheckSPoll : Address specification is wrong.
  12672	GpibCheckSPoll : The function for slaves was performed at the time of master mode.
  12673	GpibCheckSPoll : The function for masters was performed at the time of slave mode.
  12674	GpibCheckSPoll : Failed in the opening of the event.
  12677	GpibCheckSPoll : An applicable function is not in a device.
  12678	GpibCheckSPoll : Failed in the allocation of the memory.
  12680	GpibCheckSPoll : A file is not found.
  12681	GpibCheckSPoll : There are too many opened files.
  12682	GpibCheckSPoll : The file is locked.
  12683	GpibCheckSPoll : The file is set only to reading.
  12684	GpibCheckSPoll : An availability is not in a disk.
  12685	GpibCheckSPoll : The empty file was specified.
  12686	GpibCheckSPoll : It is the error about other file operations.
  12687	GpibCheckSPoll : The character sequence given to a character sequence conversion function is too long.
  12689	GpibCheckSPoll : Reverse status became effective by transmission and reception.
  12690	GpibCheckSPoll : An asynchronous function is performing.
  12691	GpibCheckSPoll : The asynchronous function was forced to terminate.
  12692	GpibCheckSPoll : The forced-termination key was pushed.
  12693	GpibCheckSPoll : An opening is not in arrangement.
  12694	GpibCheckSPoll : It is a timeout error.
  12695	GpibCheckSPoll : It is a GPIB error.
  12697	GpibCheckSPoll : Other processes are using it.
  12701	GpibSendCommands : The 1st argument is outside the setting range.
  12712	GpibSendCommands : The 2st argument is NULL.
  12721	GpibSendCommands : Address specification is wrong.
  12722	GpibSendCommands : The function for slaves was performed at the time of master mode.
  12723	GpibSendCommands : The function for masters was performed at the time of slave mode.
  12724	GpibSendCommands : Failed in the opening of the event.
  12727	GpibSendCommands : An applicable function is not in a device.
  12728	GpibSendCommands : Failed in the allocation of the memory.
  12730	GpibSendCommands : A file is not found.
  12731	GpibSendCommands : There are too many opened files.
  12732	GpibSendCommands : The file is locked.
  12733	GpibSendCommands : The file is set only to reading.
  12734	GpibSendCommands : An availability is not in a disk.
  12735	GpibSendCommands : The empty file was specified.
  12736	GpibSendCommands : It is the error about other file operations.
  12737	GpibSendCommands : The character sequence given to a character sequence conversion function is too long.
  12739	GpibSendCommands : Reverse status became effective by transmission and reception.
  12740	GpibSendCommands : An asynchronous function is performing.
  12741	GpibSendCommands : The asynchronous function was forced to terminate.
  12742	GpibSendCommands : The forced-termination key was pushed.
  12743	GpibSendCommands : An opening is not in arrangement.
  12744	GpibSendCommands : It is a timeout error.
  12745	GpibSendCommands : It is a GPIB error.
  12747	GpibSendCommands : Other processes are using it.
  12751	GpibSendTrigger : The 1st argument is outside the setting range.
  12771	GpibSendTrigger : Address specification is wrong.
  12772	GpibSendTrigger : The function for slaves was performed at the time of master mode.
  12773	GpibSendTrigger : The function for masters was performed at the time of slave mode.
  12774	GpibSendTrigger : Failed in the opening of the event.
  12777	GpibSendTrigger : An applicable function is not in a device.
  12778	GpibSendTrigger : Failed in the allocation of the memory.
  12780	GpibSendTrigger : A file is not found.
  12781	GpibSendTrigger : There are too many opened files.
  12782	GpibSendTrigger : The file is locked.
  12783	GpibSendTrigger : The file is set only to reading.
  12784	GpibSendTrigger : An availability is not in a disk.
  12785	GpibSendTrigger : The empty file was specified.
  12786	GpibSendTrigger : It is the error about other file operations.
  12787	GpibSendTrigger : The character sequence given to a character sequence conversion function is too long.
  12789	GpibSendTrigger : Reverse status became effective by transmission and reception.
  12790	GpibSendTrigger : An asynchronous function is performing.
  12791	GpibSendTrigger : The asynchronous function was forced to terminate.
  12792	GpibSendTrigger : The forced-termination key was pushed.
  12793	GpibSendTrigger : An opening is not in arrangement.
  12794	GpibSendTrigger : It is a timeout error.
  12795	GpibSendTrigger : It is a GPIB error.
  12797	GpibSendTrigger : Other processes are using it.
  12801	GpibSendDeviceClear : The 1st argument is outside the setting range.
  12821	GpibSendDeviceClear : Address specification is wrong.
  12822	GpibSendDeviceClear : The function for slaves was performed at the time of master mode.
  12823	GpibSendDeviceClear : The function for masters was performed at the time of slave mode.
  12824	GpibSendDeviceClear : Failed in the opening of the event.
  12827	GpibSendDeviceClear : An applicable function is not in a device.
  12828	GpibSendDeviceClear : Failed in the allocation of the memory.
  12830	GpibSendDeviceClear : A file is not found.
  12831	GpibSendDeviceClear : There are too many opened files.
  12832	GpibSendDeviceClear : The file is locked.
  12833	GpibSendDeviceClear : The file is set only to reading.
  12834	GpibSendDeviceClear : An availability is not in a disk.
  12835	GpibSendDeviceClear : The empty file was specified.
  12836	GpibSendDeviceClear : It is the error about other file operations.
  12837	GpibSendDeviceClear : The character sequence given to a character sequence conversion function is too long.
  12839	GpibSendDeviceClear : Reverse status became effective by transmission and reception.
  12840	GpibSendDeviceClear : An asynchronous function is performing.
  12841	GpibSendDeviceClear : The asynchronous function was forced to terminate.
  12842	GpibSendDeviceClear : The forced-termination key was pushed.
  12843	GpibSendDeviceClear : An opening is not in arrangement.
  12844	GpibSendDeviceClear : It is a timeout error.
  12845	GpibSendDeviceClear : It is a GPIB error.
  12847	GpibSendDeviceClear : Other processes are using it.
  12851	GpibChangeLocal : The 1st argument is outside the setting range.
  12871	GpibChangeLocal : Address specification is wrong.
  12872	GpibChangeLocal : The function for slaves was performed at the time of master mode.
  12873	GpibChangeLocal : The function for masters was performed at the time of slave mode.
  12874	GpibChangeLocal : Failed in the opening of the event.
  12877	GpibChangeLocal : An applicable function is not in a device.
  12878	GpibChangeLocal : Failed in the allocation of the memory.
  12880	GpibChangeLocal : A file is not found.
  12881	GpibChangeLocal : There are too many opened files.
  12882	GpibChangeLocal : The file is locked.
  12883	GpibChangeLocal : The file is set only to reading.
  12884	GpibChangeLocal : An availability is not in a disk.
  12885	GpibChangeLocal : The empty file was specified.
  12886	GpibChangeLocal : It is the error about other file operations.
  12887	GpibChangeLocal : The character sequence given to a character sequence conversion function is too long.
  12889	GpibChangeLocal : Reverse status became effective by transmission and reception.
  12890	GpibChangeLocal : An asynchronous function is performing.
  12891	GpibChangeLocal : The asynchronous function was forced to terminate.
  12892	GpibChangeLocal : The forced-termination key was pushed.
  12893	GpibChangeLocal : An opening is not in arrangement.
  12894	GpibChangeLocal : It is a timeout error.
  12895	GpibChangeLocal : It is a GPIB error.
  12897	GpibChangeLocal : Other processes are using it.
  12901	GpibSendLocalLockout : The 1st argument is outside the setting range.
  12921	GpibSendLocalLockout : Address specification is wrong.
  12922	GpibSendLocalLockout : The function for slaves was performed at the time of master mode.
  12923	GpibSendLocalLockout : The function for masters was performed at the time of slave mode.
  12924	GpibSendLocalLockout : Failed in the opening of the event.
  12927	GpibSendLocalLockout : An applicable function is not in a device.
  12928	GpibSendLocalLockout : Failed in the allocation of the memory.
  12930	GpibSendLocalLockout : A file is not found.
  12931	GpibSendLocalLockout : There are too many opened files.
  12932	GpibSendLocalLockout : The file is locked.
  12933	GpibSendLocalLockout : The file is set only to reading.
  12934	GpibSendLocalLockout : An availability is not in a disk.
  12935	GpibSendLocalLockout : The empty file was specified.
  12936	GpibSendLocalLockout : It is the error about other file operations.
  12937	GpibSendLocalLockout : The character sequence given to a character sequence conversion function is too long.
  12939	GpibSendLocalLockout : Reverse status became effective by transmission and reception.
  12940	GpibSendLocalLockout : An asynchronous function is performing.
  12941	GpibSendLocalLockout : The asynchronous function was forced to terminate.
  12942	GpibSendLocalLockout : The forced-termination key was pushed.
  12943	GpibSendLocalLockout : An opening is not in arrangement.
  12944	GpibSendLocalLockout : It is a timeout error.
  12945	GpibSendLocalLockout : It is a GPIB error.
  12947	GpibSendLocalLockout : Other processes are using it.
  13051	GpibSetStatus : The 1st argument is outside the setting range.
  13052	GpibSetStatus : The 2nd argument is outside the setting range.
  13053	GpibSetStatus : The 3rd argument is outside the setting range.
  13071	GpibSetStatus : Address specification is wrong.
  13072	GpibSetStatus : The function for slaves was performed at the time of master mode.
  13073	GpibSetStatus : The function for masters was performed at the time of slave mode.
  13074	GpibSetStatus : Failed in the opening of the event.
  13077	GpibSetStatus : An applicable function is not in a device.
  13078	GpibSetStatus : Failed in the allocation of the memory.
  13080	GpibSetStatus : A file is not found.
  13081	GpibSetStatus : There are too many opened files.
  13082	GpibSetStatus : The file is locked.
  13083	GpibSetStatus : The file is set only to reading.
  13084	GpibSetStatus : An availability is not in a disk.
  13085	GpibSetStatus : The empty file was specified.
  13086	GpibSetStatus : It is the error about other file operations.
  13087	GpibSetStatus : The character sequence given to a character sequence conversion function is too long.
  13089	GpibSetStatus : Reverse status became effective by transmission and reception.
  13090	GpibSetStatus : An asynchronous function is performing.
  13091	GpibSetStatus : The asynchronous function was forced to terminate.
  13092	GpibSetStatus : The forced-termination key was pushed.
  13093	GpibSetStatus : An opening is not in arrangement.
  13094	GpibSetStatus : It is a timeout error.
  13095	GpibSetStatus : It is a GPIB error.
  13097	GpibSetStatus : Other processes are using it.
  13101	GpibGetStatus : The 1st argument is outside the setting range.
  13102	GpibGetStatus : The 2nd argument is outside the setting range.
  13113	GpibGetStatus : The 3st argument is NULL.
  13121	GpibGetStatus : Address specification is wrong.
  13122	GpibGetStatus : The function for slaves was performed at the time of master mode.
  13123	GpibGetStatus : The function for masters was performed at the time of slave mode.
  13124	GpibGetStatus : Failed in the opening of the event.
  13127	GpibGetStatus : An applicable function is not in a device.
  13128	GpibGetStatus : Failed in the allocation of the memory.
  13130	GpibGetStatus : A file is not found.
  13131	GpibGetStatus : There are too many opened files.
  13132	GpibGetStatus : The file is locked.
  13133	GpibGetStatus : The file is set only to reading.
  13134	GpibGetStatus : An availability is not in a disk.
  13135	GpibGetStatus : The empty file was specified.
  13136	GpibGetStatus : It is the error about other file operations.
  13137	GpibGetStatus : The character sequence given to a character sequence conversion function is too long.
  13139	GpibGetStatus : Reverse status became effective by transmission and reception.
  13140	GpibGetStatus : An asynchronous function is performing.
  13141	GpibGetStatus : The asynchronous function was forced to terminate.
  13142	GpibGetStatus : The forced-termination key was pushed.
  13143	GpibGetStatus : An opening is not in arrangement.
  13144	GpibGetStatus : It is a timeout error.
  13145	GpibGetStatus : It is a GPIB error.
  13147	GpibGetStatus : Other processes are using it.
  13151	GpibReadLines : The 1st argument is outside the setting range.
  13152	GpibReadLines : The 2nd argument is outside the setting range.
  13163	GpibReadLines : The 3st argument is NULL.
  13171	GpibReadLines : Address specification is wrong.
  13172	GpibReadLines : The function for slaves was performed at the time of master mode.
  13173	GpibReadLines : The function for masters was performed at the time of slave mode.
  13174	GpibReadLines : Failed in the opening of the event.
  13177	GpibReadLines : An applicable function is not in a device.
  13178	GpibReadLines : Failed in the allocation of the memory.
  13180	GpibReadLines : A file is not found.
  13181	GpibReadLines : There are too many opened files.
  13182	GpibReadLines : The file is locked.
  13183	GpibReadLines : The file is set only to reading.
  13184	GpibReadLines : An availability is not in a disk.
  13185	GpibReadLines : The empty file was specified.
  13186	GpibReadLines : It is the error about other file operations.
  13187	GpibReadLines : The character sequence given to a character sequence conversion function is too long.
  13189	GpibReadLines : Reverse status became effective by transmission and reception.
  13190	GpibReadLines : An asynchronous function is performing.
  13191	GpibReadLines : The asynchronous function was forced to terminate.
  13192	GpibReadLines : The forced-termination key was pushed.
  13193	GpibReadLines : An opening is not in arrangement.
  13194	GpibReadLines : It is a timeout error.
  13195	GpibReadLines : It is a GPIB error.
  13197	GpibReadLines : Other processes are using it.
  20451	GpibSetEquipment : The 1st argument is outside the setting range.
  20453	GpibSetEquipment : The 3rd argument is outside the setting range.
  20454	GpibSetEquipment : The 4th argument is outside the setting range.
  20455	GpibSetEquipment : The 5th argument is outside the setting range.
  20462	GpibSetEquipment : The 2st argument is NULL.
  20921	GpibSendData : Address specification is wrong.
  20922	GpibSendData : The function for slaves was performed at the time of master mode.
  20923	GpibSendData : The function for masters was performed at the time of slave mode.
  20924	GpibSendData : Failed in the opening of the event.
  20927	GpibSendData : An applicable function is not in a device.
  20928	GpibSendData : Failed in the allocation of the memory.
  20930	GpibSendData : A file is not found.
  20931	GpibSendData : There are too many opened files.
  20932	GpibSendData : The file is locked.
  20933	GpibSendData : The file is set only to reading.
  20934	GpibSendData : An availability is not in a disk.
  20935	GpibSendData : The empty file was specified.
  20936	GpibSendData :  It is the error about other file operations.
  20937	GpibSendData : The character sequence given to a character sequence conversion function is too long.
  20939	GpibSendData : Reverse status became effective by transmission and reception.
  20940	GpibSendData : An asynchronous function is performing.
  20941	GpibSendData : The asynchronous function was forced to terminate.
  20942	GpibSendData : The forced-termination key was pushed.
  20943	GpibSendData : An opening is not in arrangement.
  20944	GpibSendData : It is a timeout error.
  20945	GpibSendData : It is a GPIB error.
  20947	GpibSendData : Other processes are using it.
  20971	GpibRecData : Address specification is wrong.
  20972	GpibRecData : The function for slaves was performed at the time of master mode.
  20973	GpibRecData : The function for masters was performed at the time of slave mode.
  20974	GpibRecData : Failed in the opening of the event.
  20977	GpibRecData : An applicable function is not in a device.
  20978	GpibRecData : Failed in the allocation of the memory.
  20980	GpibRecData : A file is not found.
  20981	GpibRecData : There are too many opened files.
  20982	GpibRecData : The file is locked.
  20983	GpibRecData : The file is set only to reading.
  20984	GpibRecData : An availability is not in a disk.
  20985	GpibRecData : The empty file was specified.
  20986	GpibRecData :  It is the error about other file operations.
  20987	GpibRecData : The character sequence given to a character sequence conversion function is too long.
  20989	GpibRecData : Reverse status became effective by transmission and reception.
  20990	GpibRecData : An asynchronous function is performing.
  20991	GpibRecData : The asynchronous function was forced to terminate.
  20992	GpibRecData : The forced-termination key was pushed.
  20993	GpibRecData : An opening is not in arrangement.
  20994	GpibRecData : It is a timeout error.
  20995	GpibRecData : It is a GPIB error.
  20997	GpibRecData : Other processes are using it.