ctlio

-Use function

Control signal setting function

-Outline

The control I/O signal is confirmed by using the control signal setting function.

-Operation method

• Set the Device name.

• Set the axis to operate in the [Change axis] menu.

• Displays the output status of OUT1 to OUT3, the status of HoldOff signal and the input status of IN1 to IN7 in the [Get status] menu.

• Change the OUT1 output status in the [OUT1 ON/OFF] menu.

• Change the OUT2 output status in the [OUT2 ON/OFF] menu.

• Change the OUT3 output status in the [OUT3 ON/OFF] menu.

• Change the HoldOff signal status in the [Hold Off] menu.

• Output the ERC signal in the [Erc Output] menu.

• Reset the ERC signal in the [Erc Reset] menu.

• Output the Alarm Clear signal in the [Alarm Clear Output] menu.

• If the setting is not valid, the Return value and error details are displayed. Check the correspondence and try again.

• Note that the status in this sample is not automatically updated because the status is displayed when the Get status menu is selected.

If you want to keep updating the displayed status value at regular intervals, please use the ctlio sample in [Programs]-[CONTEC API-SMC (WDM) for APIPAC (W32)] in the [Start] menu of the Windows taskbar.