Measure Execute Time is a utility software that measures the execution
time of digital input/output functions to the target device.
Because the function execution time varies, the measurement result is displayed
as an average per measurement.
Start the Measure Execute Time program
The Measure Execute Time program can be started from the diagnostic program.
Click the [Measurement Time] button in the diagnostic program.
Measure Execute Time
Execution time is measured for each port.
Specify the [Number of Ports] and [Start Port], and click the [Measure
(Input)] or [Measure (Output)] button.
About the setting value of [Number of Loop],
if a device other than a board (PCI or PCI Express) type is used,
if measurement is performed with the initial value of 10,000 times, it
may take a very long time until the measurement result is displayed.
We recommend that you change the measurement to about 100 times first.