Retrieves the digital filter value being set.
Ret = DioGetDigitalFilter ( Id , FilterValue )
Id
[ VB.NET: Short ] [ C, C++: short ] [ C#: short ] [ Python: ctypes.c_short
]
Specify the device ID retrieved from DioInit.
FilterValue
[ VB.NET: Short ] [ C, C++: short * ] [ C#: out short ] [ Python:
ctypes.POINTER(ctypes.c_short) ]
The returned digital filter setting value is one of the following values.
When using <DIO-1616LN-USB>
- It is a simple filter by software.
- The filter is invalid for interrupts.
Setting Value [Dec] |
Setting Time |
0 |
Digital filter unused |
1 to 11 |
Reserved |
12 |
512 [usec] |
13 |
1024 [usec] |
14 |
2.048 [msec] |
15 |
4.096 [msec] |
16 |
8.192 [msec] |
17 |
16.384 [msec] |
18 |
32.768 [msec] |
19 |
65.536 [msec] |
20 |
131.072 [msec] |
When using <CPSN-DI-08L, CPSN-DI-08BL>
Setting Value [Dec] |
Setting Time |
0 |
Digital filter unused |
1 |
Digital filter used |
When using <DIO-1616LN-ETH, DIO-1616RYN-ETH,
DIO-0404LY-WQ>
- It is a simple filter by software.
Setting Value [Dec] |
Setting Time |
0 |
Digital filter unused |
1 to 16 |
Reserved |
17 |
16.384 [msec] |
18 |
32.768 [msec] |
19 |
65.536 [msec] |
20 |
131.072 [msec] |
When using <CPS-DIO-0808L, CPS-DIO-0808BL, CPS-DIO-0808RL, CPS-DI-16L, CPS-DI-16RL>
Setting Value [Dec] |
Setting Time |
0 |
Digital filter unused |
1 |
0.25 [usec] |
2 |
0.5 [usec] |
3 |
1 [usec] |
4 |
2 [ usec] |
5 |
4 [usec] |
6 |
8 [usec] |
7 |
16 [usec] |
8 |
32 [usec] |
9 |
64 [usec] |
10 |
128 [usec] |
11 |
256 [usec] |
12 |
512 [usec] |
13 |
1024 [usec] |
14 |
2.048 [msec] |
15 |
4.096 [msec] |
16 |
8.192 [msec] |
17 |
16.384 [msec] |
18 |
32.768 [msec] |
19 |
65.536 [msec] |
20 |
131.072 [msec] |
When using <CPSN-DI-16BCL>
Setting Value [Dec] |
Setting Time |
0 |
Digital filter unused |
1 to 1000 |
Setting Value [msec] |
When using <PIO H
series: PIO-XX(XX)H, PI-XX(XX)H, PIO-16/16RY(PCI), DIO-XXXX-PE, DI-XX-PE>
When using <DIO-XXXXLX-USB>
Setting Value [Dec] |
Setting Time |
Setting Value [Dec] |
Setting Time |
0 |
Digital filter unused |
11 |
256[usec] |
1 |
0.25[usec] |
12 |
512[usec] |
2 |
0.50[usec] |
13 |
1.024[msec] |
3 |
1.0[usec] |
14 |
2.048[msec] |
4 |
2.0[usec] |
15 |
4.096[msec] |
5 |
4.0[usec] |
16 |
8.192[msec] |
6 |
8.0[usec] |
17 |
16.384[msec] |
7 |
16[usec] |
18 |
32.768[msec] |
8 |
32[usec] |
19 |
65.536[msec] |
9 |
64[usec] |
20 |
131.072[msec] |
10 |
128[usec] |
|
|
Ret [ VB.NET: Integer ] [ C, C++: long ] [ C#: int ] [ Python: ctypes.c_long ]
Definition |
Value [Dec] |
Description |
DIO_ERR_SUCCESS |
0 |
Normal completed. |
DIO_ERR_SYS_RECOVERED_FROM_STANDBY |
7 |
Execute DioResetDevice function because the device has recovered from standby mode. |
DIO_ERR_DLL_INVALID_ID |
10001 |
Invalid ID specified. |
DIO_ERR_SYS_NOT_SUPPORTED |
20001 |
This board couldn't use this function. |
The others (See also: Details of Error Code)
Retrieves the digital filter value being set.
VB.NET |
Dim Ret As Integer |
C, C++ |
long Ret; |
C# |
int Ret; |
Python |
Ret = ctypes.c_long() |