Step 5 : Set Clock

Set the clock type used for analog output by function AioSetAoClockType.

Internal Clock

Output with the period of DA conversion clock installed in the device. When using the DA conversion clock, it is necessary to set the internal clock by function AioSetAoSamplingClock.

External Clock

Input at the timing of pulse input from the outside.

Event Controller Output

The output signal from the event controller can be used as a clock.
Please refer to the tutorial of Event Controller.

Ret = AioSetAoClockType ( Id , AoClockType )

In AoClockType, set the clock type.

Set the internal clock of analog output by using function AioSetAoSamplingClock This setting is unnecessary when the clock is set to be External Clock.

Ret = AioSetAoSamplingClock ( Id , AoSamplingClock )

In AoSamplingClock, specify the internal clock in usec.