As the counter input signal, it is possible to select an external clock or a signal from the event controller.
Use the signal which is input from the external connector own.
Use the output signal from the event controller.
Please refer to the tutorial on the Event Controller
Using function AioSetCntInputSignal to set input signal.
Ret = AioSetCntInputSignal ( Id , CntChannel , CntInputSignal )
Sets the channel number of counter in the CntChannel.
Specifies the clock type in the CntInputSignal.
This value is 0 when the external clock is used, and 10 when the event controller is used.