AioSetAoRangeAll

Function

Sets the analog output range for all channels.

Format

Ret = AioSetAoRangeAll ( Id , AoRange )

Parameters

Id [ VB.NET : Short ] [ C, C++ : short ] [ C# : short ] [ Python : ctypes.c_short ]
Specifies the ID retrieved from AioInit function.

AoRange [ VB.NET : Short ] [ C, C++ : short ] [ C# : short ] [ Python : ctypes.c_short ]
Specifies the analog output range from the following range with macro or value.
The available value differs by the device.

Range	Macro	Value
-10 to 10V	PM10	0
-5 to 5V	PM5	1
-2.5 to 2.5V	PM25	2
-1.25 to 1.25V	PM125	3
0 to 10V	P10	50
0 to 5V	P5	51
0 to 2.5V	P25	53
0 to 1.25V	P125	54
0 to 20mA	P20MA	100
4 to 20mA	P4TO20MA	101
1 to 5V	P1TO5	150

Return value

Ret [ VB.NET : Integer ] [ C, C++ : long ] [ C# : int ] [ Python : ctypes.c_long ]

Return values	Content
0	Normality completion
7	Execute AioResetDevice function because the device has recovered from standby mode
10001	Invalid Id was specified Use the Id retrieved from AioInit to specify the Id in this function.
10002	AIO driver can't be called At first, perform AioInit function.
13120	The value of AoRange is outside the designated range of the function
20001	This function can't be used by this device
20002	Can not use while by another device works To use this function, analog output operation must be stopped.
23120	The value of AoRange is outside the designated range of the device being used

Initial value

It differs by the device type.
If the range is set by software, the initial value is the status when each device is powered on.
If the range is set by jumper, the initial value is the factory settings.

Remarks

This function cannot be used on devices without the analog output function.
If the device is in operation, the function cannot be performed.

Specifications based on devices

AIO-163202G-PE AIO-163202UG-PE AIO-123202G-PE AIO-123202UG-PE	The range is only changed by performing the function. The output value will be 0V when this function is executed. -10 to 10V:AoRange = 0 -5 to 5V:AoRange = 1 -2.5 to 2.5V:AoRange = 2 -1.25 to 1.25V:AoRange = 3 0 to 10V:AoRange = 50 0 to 5V:AoRange = 51 0 to 2.5V:AoRange = 53 Initial value is AoRange = 53. Cannot set to each channel.
AIO-163202F-PE ADA16-32/2(PCI)F	The range is only changed by performing the function. -10 to 10V:AoRange = 0 -5 to 5V:AoRange = 1 -2.5 to 2.5V:AoRange = 2 -1.25 to 1.25V:AoRange = 3 0 to 10V:AoRange = 50 0 to 5V:AoRange = 51 0 to 2.5V:AoRange = 53 Initial value is AoRange = 53. Cannot set to each channel.
AIO-160802L-LPE ADA16-8/2(LPCI)L ADAI16-8/2(LPCI)L AIO-160802LI-PE	-10 to 10V is fixed.
AO-1604L-LPE DA16-16(LPCI)L DA16-8(LPCI)L DA16-4(LPCI)L DAI16-4(LPCI)L AO-1604LI-PE AO-1608L-LPE AO-1616L-LPE AO-1604LX-USB	-10 to 10V is fixed.
DA12-16(PCI) DA12-8(PCI) DA12-4(PCI)	The range is only changed by performing the function. -10 to 10V:AoRange = 0 -5 to 5V:AoRange = 1 0 to 10V:AoRange = 50 Initial value is AoRange = 0. It can be set for each channel.
AO-1604CI3-PCI	The range is only changed by the JP settings. -10 to 10V:JP settings 0 to 10V:JP settings 0 to 20mA:JP settings Initial value is set by the JP settings. It can be set for each channel.
AIO-160802AY-USB AIO-160802GY-USB	-10 to 10V is fixed.
AIO-163202FX-USB	The range is only changed by performing the function. -10 to 10V:AoRange = 0 -5 to 5V:AoRange = 1 -2.5 to 2.5V:AoRange = 2 -1.25 to 1.25V:AoRange = 3 0 to 10V:AoRange = 50 0 to 5V:AoRange = 51 0 to 2.5V:AoRange = 53 Initial value is AoRange = 53. Cannot set to each channel.
AIO-121602LN-USB AIO-120802LN-USB	The range is only changed by performing the function. -10 to 10V:AoRange = 0 -5 to 5V:AoRange = 1 0 to 10V:AoRange = 50 0 to 5V:AoRange = 51 Initial value is AoRange = 0. Cannot set to each channel.
AO-1604VIN-USB AO-1604VIN-ETH	-10 to 10V is fixed.
AO-1604AIN-USB AO-1604AIN-ETH	0 to 20mA is fixed.
AD12-16(PCI)EV AD12-16U(PCI)EV AD12-64(PCI) AD12-16(PCI) AIO-121601E3-PE AIO-121601UE3-PE	The range is only changed by the JP settings. -10 to 10V:Only the JP settings -5 to 5V:Only the JP settings 0 to 10V:Only the JP settings Initial value is set by the JP settings.
AD16-16(PCI)EV AD16-16U(PCI)EV AIO-161601E3-PE AIO-161601UE3-PE	The range is only changed by the JP settings. -10 to 10V:Only the JP settings 0 to 10V:Only the JP settings Initial value is set by the JP settings.
DEMO DEVICE	All ranges can be set. Initial value is AoRange = 0. It can be set for each channel.
CPS-AO-1604LI	0 to 20mA is fixed.
CPS-AO-1604VLI	-10 to 10V is fixed.
CPSN-AO-1602LC	The range is only changed by performing the function. -10 to 10V:AoRange = 0 -5 to 5V:AoRange = 1 0 to 10V:AoRange = 50 0 to 5V:AoRange = 51 0 to 20mA:AoRange = 100 Initial value is AoRange = 0. It can be set for each channel.

Example

All the channel ranges are set to -10 to 10V.

VB.NET	Dim Ret As Integer Ret = AioSetAoRangeAll ( Id , PM10 )
C, C++	long Ret; Ret = AioSetAoRangeAll ( Id , PM10 );
C#	int Ret; Ret = aio.SetAoRangeAll ( Id , (short)CaioConst.PM10 );
Python	Ret = ctypes.c_long() Ret.value = caio.AioSetAoRangeAll ( Id , caio.PM10 )