-Use function
Control signal setting function
-Outline
The control I/O signal is confirmed by using the control signal setting function.
-Operation method
• In the console sample, [Enter the device name:] is displayed, so enter the Device name.
• In the console_curses sample, set the Device name in the [Set DeviceName] menu.
• Set the axis to operate in the [Change axis] menu.
• Change the OUT1 output status in the [OUT1 ON/OFF] menu.
• Change the OUT2 output status in the [OUT2 ON/OFF] menu.
• Change the OUT3 output status in the [OUT3 ON/OFF] menu.
• Change the Hold Off signal status in the [Hold Off] menu.
• Output the ERC signal in the [Erc Output] menu.
• Reset the ERC signal in the [Erc Reset] menu.
• Output the Alarm Clear signal in the [Alarm Clear Output] menu.
• In the console sample, display the output status of OUT1 to OUT3, the status of Hold Off signal and the input status of IN1 to IN7 in the [Get status] menu.
• In the console_curses sample, update the output status of OUT1 to OUT3, the status of Hold Off signal and the input status of IN1 to IN7 at regular intervals.
• If the setting is not valid, the Return value and error details are displayed. Check the correspondence and try again.