Counter Operation Mode Setting

The necessary mode setting for counter operation is described as follows.
Please refer to Glossary for the description of each item.

Set signal source

Set external signal source to TTL, Photocoupler or Differential. (the function of CntSelectChannelSignal)

Mono-phase/2-phase/Gate Control

Set that how to use input signal A phase and B phase. (the function of CntSetOperationMode)

Multiplier (1X / 2X / 4X)

Set that how to count input signal A phase and B phase. (the function of CntSetOperationMode)

Set clear mode

Set it to either Synchronous Clear or Asynchronous Clear. (the function of CntSetOperationMode)

Set count direction

Set either Up Count or Down Count for input pulse. (the function of CntSetCountDirection)

Set Z phase mode

Set Z phase mode (Not Used / Next One Time / Every Time). (the function of CntSetZMode)

Set Z phase logic

Set Z phase logic (Positive / Negative). (the function of CntSetZLogic)

Set digital filter

Set the digital filter coefficient. (the function of CntSetDigitalFilter)