Support Device

■ USB Devices

CNT-3204IN-USB

■ PCI Express Boards

CNT-3204MT-LPE (*a) (*b)
CNT-3208M-PE (*a) (*b)

■ PCI Boards

CNT24-4(PCI)H (*a)
CNT24-4D(PCI)H (*a)
CNT32-4MT(LPCI) (*a) (*b)
CNT32-8M(PCI) (*a) (*b)

■ Ethernet Devices

CNT-3204IN-ETH

■ CONPROSYS Devices
(Used in combination with CPS-BXC200) (*c)

CPS-CNT-3202I (*a)

■ CONPROSYS nano Devices
(Used in combination with CPSN-MCB271) (*d)

CPSN-CNT-3201I

■ Raspberry Pi Expansion Card CPI Series (*e)

CPI-CNT-3201I

■ Controllers

<Box Computer>
CPS-BXC200

<CONPROSYS nano Master Unit> (*f)
CPSN-MCB271-S1-041
CPSN-MCB271-1-041
CPSN-MCB271-1-081

*a: It is adopted Timer function.
*b: The device has Bus master transfer function (Sampling function). However, the device driver doesn't support them.
*c: Only used in combination with CPS-BXC200, supported OS is 64bit only.
     It does not support it with CPS-MCS341 series. Please consider to use it with DAQ-LIBMB-LNX.
*d: It supports the combination with CPSN-MCB271 series. It does not support it with CC-USB271 series.
*e: In order to use the Raspberry Pi Expansion Card CPI Series, it is necessary to enable the I2C function.
      See Installation for how to enable the I2C function.
*f: PC can access and use CONPROSYS nano unit (master unit) through the wired LAN port.
   However, it is not supported to access it through RS-232C port or USB port on CONPROSYS nano Master Unit.

Please refer "Counter Type specification" to know counter type.