AioSetAoRepeatTimes


Function

Sets the repeat times.

Format

Ret = AioSetAoRepeatTimes ( Id , AoRepeatTimes )

Parameters

Id [ C, C++ : short ] [ Python : ctypes.c_short ]
Specifies the Device ID retrieved from AioInit function.

AoRepeatTimes [ C, C++ : long ] [ Python : ctypes.c_long ]
Specifies the repeat times

0

Repeat action is repeated infinitely

1 to

Repeat action is performed specified times

Return value

Ret [ C, C++ : long ] [ Python : ctypes.c_long ]

Return values

Content

0

Normality completion

7

Execute AioResetDevice function because the device has recovered from standby mode

10001

Invalid Id was specified
Use the Id retrieved from AioInit to specify the Id in this function.

10002

AIO driver can't be called
At first, perform AioInit function.

13160

The value of AoRepeatTimes is outside the designated range of the function
AoRepeatTimes should be set to a value greater than or equal to 0.

20001

This function can't be used by this device

20002

Can not use while by another device works
To use this function, analog output operation must be stopped.

20003

Can not use because another process is using the device
When another process is using the device, all functions except for those that support multi-process can not be performed.

23161

Repeat function is only available when using RING memory

Initial value

In all devices, 1

Remarks

Repeat action is the action that is performed repeat times from the generating start to stop. 
If the memory type is FIFO, this settings have no meaning.

This function cannot be used on devices without the analog output function.
If the device is in operation, the function cannot be performed.

Specifications based on devices

AIO-163202G-PE
AIO-163202UG-PE
AIO-123202G-PE
AIO-123202UG-PE
AIO-163202F-PE
ADA16-32/2(PCI)F

Usable AoRepeatTimes range is 0, 1 to 65535.

ADA16-8/2(LPCI)L
ADAI16-8/2(LPCI)L
DAI16-4(LPCI)L
DA16-4(LPCI)L
DA16-8(LPCI)L
DA16-16(LPCI)L
AIO-160802L-LPE
AIO-160802LI-PE
AO-1604LI-PE
AO-1608L-LPE
AO-1616L-LPE
AO-1604L-LPE

Usable AoRepeatTimes range is 0, 1 to 2147483647.

AIO-163202FX-USB

Usable AoRepeatTimes range is 0, 1 to 65535.

AIO-160802AY-USB
AIO-160802GY-USB
AIO-120802LN-USB
AIO-121602LN-USB
AO-1604LX-USB
AO-1604VIN-USB
AO-1604AIN-USB
AO-1604VIN-ETH
AO-1604AIN-ETH

Usable AoRepeatTimes range is 0, 1 to 2147483647.
If the conversion start/stop condition is specified to external trigger, the repeat times is limited to 1 time only.

Example

Sets 100 to repeat times. 

C, C++

long Ret;
Ret = AioSetAoRepeatTimes ( Id , 100 );
 

Python

Ret = ctypes.c_long()
Ret.value = caio.AioSetAoRepeatTimes ( Id , 100 )
 

See also

AioGetAoRepeatTimes AioGetAoRepeatCount