AioSetAiStopDelayTimes

Function

Sets the number of delayed samplings after the sampling stop conditions are satisfied.

Format

Ret = AioSetAiStopDelayTimes ( Id , AiStopDelayTimes)

Parameters

Id [ C, C++ : short ] [ Python : ctypes.c_short ]
Specifies the Device ID retrieved from AioInit function.

AiStopDelayTimes [ C, C++ : long ] [ Python : ctypes.c_long ]
Specifies the number of delayed samplings after the sampling stop conditions are satisfied.

Return value

Ret [ C, C++ : long ] [ Python : ctypes.c_long ]

Return values	Content
0	Normality completion
7	Execute AioResetDevice function because the device has recovered from standby mode
10001	Invalid Id was specified Use the Id retrieved from AioInit to specify the Id in this function.
10002	AIO driver can't be called At first, perform AioInit function.
11360	The value of AiStopDelayTimes is outside the designated range of the function AiStopDelayTimes should be set to a value greater than or equal to 0.
20001	This function can't be used by this device
20002	Can not use while by another device works To use this function, analog input operation must be stopped.
20003	Can not use because another process is using the device When another process is using the device, all functions except for those that support multi-process can not be performed.

Initial value

In all devices, AiStopDelayTimes = 0

Remarks

This function cannot be used on devices without the analog input function.
If the device is in operation, the function cannot be performed.

Specifications based on devices

AI-1204Z-PE AI-1664UG-PE AIO-163202G-PE AIO-163202UG-PE AIO-123202G-PE AIO-123202UG-PE	Usable AiStopDelayTimes is 0 to 134217728.
AIO-163202F-PE ADA16-32/2(PCI)F	Usable AiStopDelayTimes is 0 to 67108864.
AI-1216I2-PCI AIO-121601E3-PE AIO-121601UE3-PE AIO-161601E3-PE AIO-161601UE3-PE AD12-16(PCI)EV AD12-16U(PCI)EV AD16-16(PCI)EV AD16-16U(PCI)EV	Usable AiStopDelayTimes is 0 to 16777215.
AIO-163202FX-USB	Usable AiStopDelayTimes is 0 to 67108864.

Example

Sets the number of delayed samplings to 100 after the sampling stop conditions are satisfied.

C, C++	long Ret; Ret = AioSetAiStopDelayTimes ( Id , 100 );
Python	Ret = ctypes.c_long() Ret.value = caio.AioSetAiStopDelayTimes ( Id , 100 )