Error Code Details

Return code	Details of Error
0	Normality completion
1	Failed in the acquisition of the resource When you install the hardware, the resource of I/O address, interrupt level cannot be retrieved. Check the resource in Configuration Tool (config).
2	Failed in the registration of the interruption routine The device may be being used by such another driver as API-AIO. Please remove other drivers by using Configuration Tool (config). And, if the device is with interrupt jumper, please do the necessary settings.
3	Failed in the allocation of the memory Memory is insufficient. Terminate the unnecessary applications.
4	Failed in the access of registry Please contact CONTEC Information Center.
5	The value of Address is unusual at the time of bus-master registration Please contact CONTEC Information Center.
6	Failed in the creation of the adapter object Please contact CONTEC Information Center.
7	Execute AioResetDevice function because the device has recovered from standby mode
8	Initialization failed because caio.sys is not found
9	Initialization failed because the file version of caio.dll cannot be acquired
10	Initialization failed because the file version of caio.sys cannot be acquired
11	Initialization failed because the file version of caio.dll is not same as caio.sys
10000	The device name which wasn't registered by Configuration Tool was specified Specify the right device name.
10001	Invalid ID was specified Please use the ID retrieved from AioInit to specify the ID in function.
10002	AIO driver can't be called At first, perform the function AioInit.
10003	Failed in the creation of the file Please confirm whether the device driver has been started up normally in Configuration Tool (config). If the device driver has not been started up normally, delete the device from Configuration Tool (config), and recognize the device again.
10004	Failed in the closing of the file There is a possibility that you performed termination processing for a device which was not initialized. This error may be ignored.
10005	Failed in the creation of the thread Please contact CONTEC Information Center.
10006	Device not found Make sure that the device is registered in Configuration Tool (config).
10007	Pointer to DeviceName is NULL
10008	Pointer to Device is NULL
10009	Device not found Make sure that the device is registered in Configuration Tool (config).
10010	Pointer to DeviceName is NULL
10011	Pointer to Device is NULL
10012	Pointer to BoardId is NULL
10013	Could not get device type
10014	Pointer to Device is NULL
10015	Pointer to DeviceType is NULL
10100	A device name isn't stored in DeviceName The string DeviceName is empty. Please store the device name into it.
10101	Pointer to Id is NULL Specify the address of variable to parameter.
10180	Pointer to ErrorString is NULL Specify the address of variable to parameter.
10220	The value of Offset is a minus Specify a positive number to Offset.
10221	Pointer to Data is NULL Specify the address of variable to parameter.
10222	The value of Flag is outside the designated range of the function
10240	The value of Offset is a minus Specify a positive number to Offset.
10241	Pointer to Data is NULL Specify the address of variable to parameter.
10242	The value of Flag is outside the designated range of the function
10260	The value of Offset is a minus Specify a positive number to Offset.
10261	Pointer to Data is NULL Specify the address of variable to parameter.
10262	The value of Flag is outside the designated range of the function
10280	The value of Offset is a minus Specify a positive number to Offset.
10281	The value of Flag is outside the designated range of the function
10300	The value of Offset is a minus Specify a positive number to Offset.
10301	The value of Flag is outside the designated range of the function
10320	The value of Offset is a minus Specify a positive number to Offset.
10321	The value of Flag is outside the designated range of the function
10340	The value of Signal is outside the designated range of the function
10341	The value of Value is outside the designated range of the function
10350	The value of Signal is outside the designated range of the function
10351	Pointer to Value is NULL
10440	Pointer to InfoData is NULL
11000	The value of AiInputMethod is outside the designated range of the function Set 0(single end input) or 1(differential input) to AiInputMethod.
11000	The value of AiInputMethod is outside the designated range of the function Set 0(single end input) or 1(differential input) to AiInputMethod.
11010	Pointer to AiInputMethod is NULL Specify the address of variable to parameter.
11020	The value of AiChannels is outside the designated range of the function Specify the number of analog input channels in range: 1 <= AiChannels <= Max number of channels.
11030	Pointer to AiChannels is NULL Specify the address of variable to parameter.
11040	The value of AiChennal is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
11041	The value of AiRange is outside the designated range of the function
11050	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
11051	Pointer to AiRange is NULL Specify the address of variable to parameter.
11060	The value of AiRange is outside the designated range of the function
11080	The value of AiMemoryType is outside the designated range of the function Set 0(FIFO) or 1(RING) to AiMemoryType.
11090	Pointer to AiMemoryType is NULL Specify the address of variable to parameter.
11100	The value of AiRepeatTimes is outside the designated range of the function AiRepeatTimes should be set to a value greater than or equal to 0.
11110	Pointer to AiRepeatTimes is NULL Specify the address of variable to parameter.
11120	The value of AiClockType is outside the designated range of the function Set 0(clock for conversion) or 1(external clock) to AiClockType.
11130	Pointer to AiClockType is NULL Specify the address of variable to parameter.
11140	The value of AiSamplingClock is outside the designated range of the function AiSamplingClock should be set to a value greater than or equal to 1.
11150	Pointer to AiSamplingClock is NULL Specify the address of variable to parameter.
11160	The value of AiStartTrigger is outside the designated range of the function
11170	Pointer to AiStartTrigger is NULL Specify the address of variable to parameter.
11180	The value of AiChennal is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
11181	The value of AiDirection is outside the designated range of the function Set 0(both sides), 1(rising) or 2(falling) to AiDirection.
11190	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <=AiChannel <= Max channel.
11191	Pointer to AiStartLevel is NULL Specify the address of variable to parameter.
11192	Pointer to AiDirection is NULL Specify the address of variable to parameter.
11260	The value of AiStopTrigger is outside the designated range of the function Specify the condition for stopping conversion in range: 0 <= AiStopTrigger <= 4.
11270	Pointer to AiStopTrigger is NULL Specify the address of variable to parameter.
11280	The value of AiStopTimes is outside the designated range of the function AiStopTimes should be set to a value greater than or equal to 1.
11290	Pointer to AiStopTimes is NULL Specify the address of variable to parameter.
11300	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
11301	The value of AiDirection is outside the designated range of the function Set 0(both sides), 1(rising) or 2(falling) to AiDirection.
11310	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
11311	Pointer to AiStopLevel is NULL Specify the address of variable to parameter.
11312	Pointer to AiDirection is NULL Specify the address of variable to parameter.
11360	The value of AiStopDelayTimes is outside the designated range of the function AiStopDelayTimes should be set to a value greater than or equal to 0.
11370	Pointer to AiStopDelayTimes is NULL Specify the address of variable to parameter.
11390	Pointer to AiEvent is NULL Specify the address of variable to parameter.
11400	The value of AiSamplingTimes is outside the designated range of the function AiSamplingTimes should be set to a value greater than or equal to 0.
11410	Pointer to AiSamplingTimes is NULL Specify the address of variable to parameter.
11420	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
11421	Pointer to AiData is NULL Specify the address of variable to parameter.
11440	The value of AiChannels is outside the designated range of the function Specify the number of channels setting in range: 1 <= AiChannels <= Max number of channels.
11441	Pointer to AiData is NULL Specify the address of variable to parameter.
11460	The thread can't be carried out
11500	Pointer to AiStatus is NULL Specify the address of variable to parameter.
11520	Pointer to AiSamplingCount is NULL Specify the address of variable to parameter.
11540	Pointer to AiRepeatCount is NULL Specify the address of variable to parameter.
11560	Pointer to AiStopTriggerCount is NULL Specify the address of variable to parameter.
11580	Pointer to AiSamplingTimes is NULL Specify the address of variable to parameter.
11581	Pointer to AiData is NULL Specify the address of variable to parameter.
11582	The value of AiSamplingTimes is outside the designated range of the function
11720	Pointer to AiMaxChannels is NULL Specify the address of variable to parameter.
11740	Pointer to AiResolution is NULL Specify the address of variable to parameter.
11760	The value of AiChannel is outside the designated range of the function Specify the analog input channel in range: 0 <= AiChannel <= Max channel.
11761	The value of Sequence is outside the designated range of the function Specify the order for channels to convert in range: 0 <= AiChannel <= Max channel.
11770	The value of AiChannel is outside the designated range of the function Specify the analog input channel in range: 0 <= AiChannel <= Max channel.
11771	Pointer to Sequence is NULL Specify the address of variable to parameter.
11820	The value of AiMemorysize is outside the designated range of the function
11830	Pointer to AiMemorySize is NULL
11840	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
11841	Pointer to AiData is NULL Specify the address of variable to parameter.
11860	The value of AiChannels is outside the designated range of the function Specify the number of channels setting in range: 1 <= AiChannels <= Max number of channels.
11861	Pointer to AiData is NULL Specify the address of variable to parameter.
11880	Pointer to AiSamplingTimes is NULL Specify the address of variable to parameter.
11881	Pointer to AiData is NULL Specify the address of variable to parameter.
11882	The value of AiSamplingTimes is outside the designated range of the function
11920	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
11921	The value of AiDirection is outside the designated range of the function
11930	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
11931	Pointer to AiStartLevel is NULL Specify the address of variable to parameter.
11932	Pointer to AiDirection is NULL
11940	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
11941	The value of AiDirection is outside the designated range of the function
11950	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
11951	Pointer to AiStopLevel is NULL Specify the address of variable to parameter.
11952	Pointer to AiDirection is NULL Specify the address of variable to parameter.
11960	The value of AiTransferMode is outside the designated range of the function
11970	Pointer to AiTransferMode is NULL Specify the address of variable to parameter.
11980	The value of DataNumber is outside the designated range of the function
11981	Pointer to Buffer is NULL Specify the address of variable to parameter.
11982	It failed in securing a buffer for Bus-Master transfer
12020	Pointer to DataSize is NULL Specify the address of variable to parameter.
12040	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
12041	The value of StateTimes is outside the designated range of the function
12050	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
12051	Pointer to Level1 is NULL Specify the address of variable to parameter.
12052	Pointer to Level2 is NULL Specify the address of variable to parameter.
12053	Pointer to StateTimes is NULL Specify the address of variable to parameter.
12060	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
12061	The value of StateTimes is outside the designated range of the function
12070	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
12071	Pointer to Level1 is NULL Specify the address of variable to parameter.
12072	Pointer to Level2 is NULL Specify the address of variable to parameter.
12073	Pointer to StateTimes is NULL Specify the address of variable to parameter.
12080	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
12081	The value of StateTimes is outside the designated range of the function
12090	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
12091	Pointer to Level1 is NULL Specify the address of variable to parameter.
12092	Pointer to Level2 is NULL Specify the address of variable to parameter.
12093	Pointer to StateTimes is NULL Specify the address of variable to parameter.
12100	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
12101	The value of StateTimes is outside the designated range of the function
12110	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
12111	Pointer to Level1 is NULL Specify the address of variable to parameter.
12112	Pointer to Level1 is NULL Specify the address of variable to parameter.
12113	Pointer to StateTimes is NULL Specify the address of variable to parameter.
12120	The value of AiTransferTimes is outside the designated range of the function
12130	Pointer to AiSamplingTimes is NULL Specify the address of variable to parameter.
12140	Pointer to AiTransferCount is NULL Specify the address of variable to parameter.
12160	Pointer to Lap is NULL Specify the address of variable to parameter.
12180	Pointer to Count is NULL Specify the address of variable to parameter.
12200	The value of Range is outside the designated range of the function
12201	The value of Type is outside the designated range of the function
12202	The value of Data is outside the designated range of the function
12003	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <=AiChannel <= Max channel.
12210	The value of Range is outside the designated range of the function
12211	The value of Type is outside the designated range of the function
12212	Pointer to Data is NULL Specify the address of variable to parameter.
12213	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
12220	The value of Range is outside the designated range of the function
12221	The value of Type is outside the designated range of the function
12222	Pointer to Data is NULL Specify the address of variable to parameter.
12223	The value of AiChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AiChannel <= Max channel.
12240	The value of AiScanClock is outside the designated range of the function
12250	Pointer to AiScanClock is NULL
12260	Pointer to AoSamplingClock is NULL
12310	The value of AiClockEdge is outside the designated range of the function
12320	Pointer to AiClockEdge is NULL
12382	Timeout occurred. Please reset the device, or extend the timeout period.
12530	AutoMode is NULL. Please specify the address of the variable in the parameter.
12531	TransferSize is NULL. Please specify the address of the variable in the parameter.
13000	The value of AoChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AoChannel <= Max channel.
13020	The value of AoChannels is outside the designated range of the function Specify the number of analog output channels in range: 1 <= AoChannels <= Max number of channels.
13021	Pointer to AoData is NULL Specify the address of variable to parameter.
13040	Pointer to AoResolution is NULL Specify the address of variable to parameter.
13060	The value of AoChannels is outside the designated range of the function Specify the number of analog output channels in range: 1 <= AoChannels <= Max number of channels.
13070	Pointer to AoChannels is NULL Specify the address of variable to parameter.
13080	Pointer to AoMaxChannels is NULL Specify the address of variable to parameter.
13100	The value of AoChannels is outside the designated range of the function Specify the number of analog output channels in range: 1 <= AoChannels <= Max number of channels.
13101	The value of AoRange is outside the designated range of the function
13110	The value of AoChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AoChannel <= Max channel.
13111	Pointer to AoRange is NULL Specify the address of variable to parameter.
13120	The value of AoRange is outside the designated range of the function
13140	The value of AoMemoryType is outside the designated range of the function Set 0(FIFO) or 1(RING) to AiMemoryType.
13150	Pointer to AoMemoryType is NULL Specify the address of variable to parameter.
13160	The value of AoRepeatTimes is outside the designated range of the function AoRepeatTimes should be set to a value greater than or equal to 0.
13170	Pointer to AoRepeatTimes is NULL Specify the address of variable to parameter.
13180	The value of AoClockType is outside the designated range of the function Set 0(clock for conversion) or 1(external clock) to AoClockType.
13190	Pointer to AoClockType is NULL Specify the address of variable to parameter.
13200	The value of AoSamplingClock is outside the designated range of the function AoSamplingClock should be set to a value greater than or equal to 1.
13210	Pointer to AoSamplingClock is NULL Specify the address of variable to parameter.
13220	The value of AoSamplingTimes is outside the designated range of the function AoSamplingClock should be set to a value greater than or equal to 1.
13221	Pointer to AoData is NULL Specify the address of variable to parameter.
13230	Pointer to AoSamplingTimes is NULL Specify the address of variable to parameter.
13240	The value of AoStartTrigger is outside the designated range of the function
13250	Pointer to AoStartTrigger is NULL Specify the address of variable to parameter.
13260	The value of AoStopTrigger is outside the designated range of the function
13270	Pointer to AoStopTrigger is NULL Specify the address of variable to parameter.
13290	Pointer to AoEvent is NULL Specify the address of variable to parameter.
13300	The value of AoSamplingTimes is outside the designated range of the function AoSamplingTimes should be set to a value greater than or equal to 1.
13310	Pointer to AoSamplingTimes is NULL Specify the address of variable to parameter.
13320	The thread can't be carried out
13360	The value of AoChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AoChannel <= Max channel.
13370	The value of AoChannel is outside the designated range of the function Specify the channel setting in range: 0 <= AoChannel <= Max channel.
13380	Pointer to AoStatus is NULL Specify the address of variable to parameter.
13400	Pointer to AoSamplingCount is NULL Specify the address of variable to parameter.
13420	Pointer to AoRepeatCount is NULL Specify the address of variable to parameter.
13480	The value of AoMemorySize is outside the designated range of the function
13490	Pointer to AoMemorySize is NULL
13500	The value of AoChannel is outside the designated range of the function
13520	The value of AoChannels is outside the designated range of the function
13540	The value of AoSamplingTimes is outside the designated range of the function
13541	Pointer to AoData is NULL
13580	The value of AoTransferMode is outside the designated range of the function
13590	Pointer to AoTransferMode is NULL
13600	The value of DataNumber is outside the designated range of the function
13601	Pointer to Buffer is NULL
13602	It failed in securing a buffer for Bus-Master transfer
13640	Pointer to DataSize is NULL
13660	The value of AoTransferTimes is outside the designated range of the function
13670	Pointer to AoSamplingTimes is NULL
13680	Pointer to AoTransferCount is NULL
13700	Pointer to Lap is NULL
13720	The value of Range is outside the designated range of the function
13721	The value of Type is outside the designated range of the function
13722	The value of Data is outside the designated range of the function
13723	The value of AoChannel is outside the designated range of the function
13730	The value of Range is outside the designated range of the function
13731	The value of Type is outside the designated range of the function
13732	Pointer to Data is NULL
13733	The value of AoChannel is outside the designated range of the function
13740	The value of Range is outside the designated range of the function
13741	The value of Type is outside the designated range of the function
13742	Pointer to Data is NULL
13743	The value of AoChannel is outside the designated range of the function
13760	Pointer to AoSamplingClock is NULL
13770	The value of AoClockEdge is outside the designated range of the function
13780	Pointer to AiClockEdge is NULL
13990	AutoMode is NULL. Please specify the address of the variable in the parameter
13991	TransferSize is NULL. Please specify the address of the variable in the parameter
14000	The value of DiBit is outside the designated range of the function Specify the digital input bit in range: 0 <= DiBit <= Max bit.
14001	Pointer to DiData is NULL Specify the address of variable to parameter.
14010	The value of DiPort is outside the designated range of the function Specify the digital input port in range: 0 <= DiPort <= Max port.
14011	Pointer to DiData is NULL Specify the address of variable to parameter.
14020	The value of DoBit is outside the designated range of the function Specify the digital output bit in range: 0 <= DoBit <= Max bit.
14021	The value of DoData is outside the designated range of the function
14030	The value of DoPort is outside the designated range of the function Specify the digital output port in range: 0 <= DoPort <= Max port.
14031	The value of DoData is outside the designated range of the function
14040	The value of Bit is outside the designated range of the function
14041	The value of Value is outside the designated range of the function
14050	The value of Bit is outside the designated range of the function
14051	Pointer to Value is NULL
15000	The value of CntChannel is outside the designated range of the function
15010	The value of CntChannel is outside the designated range of the function
15011	Pointer to CntMode is NULL
15020	The value of CntChannel is outside the designated range of the function
15021	The value of PresetNumber is outside the designated range of the function
15022	The value of Flag is outside the designated range of the function
15023	Pointer to PresetData is NULL
15040	The value of CntChannel is outside the designated range of the function
15041	The value of ComparisonNumber is outside the designated range of the function
15042	The value of Flag is outside the designated range of the function
15043	Pointer to PresetData is NULL
15060	The value of CntChannel is outside the designated range of the function
15061	The value of CntClockType is outside the designated range of the function
15070	The value of CntChannel is outside the designated range of the function
15071	Pointer to CntClockType is NULL
15080	The value of CntChannel is outside the designated range of the function
15090	The value of CntChannel is outside the designated range of the function
15091	Pointer to CntEvent is NULL
15100	The value of CntChannel is outside the designated range of the function
15120	The value of CntChannel is outside the designated range of the function
15121	The value of Signal is outside the designated range of the function
15122	The value of Value is outside the designated range of the function
15130	The value of CntChannel is outside the designated range of the function
15131	The value of Signal is outside the designated range of the function
15132	Pointer to Value is NULL
15140	The value of CntChannel is outside the designated range of the function
15141	The thread can't be carried out
15160	The value of CntChannel is outside the designated range of the function
15180	The value of CntChannel is outside the designated range of the function
15200	The value of CntChannel is outside the designated range of the function
15201	Pointer to CntStatus is NULL
15220	The value of CntChannel is outside the designated range of the function
15221	Pointer to Count is NULL
15240	The value of CntChannel is outside the designated range of the function
15260	Pointer to CntMaxChannels is NULL
16000	The value of TimerId is outside the designated range of the function
16010	The value of TimerId is outside the designated range of the function
16011	Pointer to TmEvent is NULL
16020	The value of TimerId is outside the designated range of the function
16040	The value of TimerId is outside the designated range of the function
16041	The value of Interval is outside the designated range of the function
16042	The thread can't be carried out
16060	The value of TimerId is outside the designated range of the function
16080	The value of TimerId is outside the designated range of the function
16100	The value of TimerId is outside the designated range of the function
16120	The value of TimerId is outside the designated range of the function
16121	Pointer to Lap is NULL
16140	The value of TimerId is outside the designated range of the function
16160	The value of TimerId is outside the designated range of the function
16161	The value of Wait is outside the designated range of the function
17000	The value of Destination is outside the designated range of the function
17001	The value of Source is outside the designated range of the function
17010	The value of Input is outside the designated range of the function
17011	Pointer to Output is NULL
18000	Invalid mode setting
18002	Pointer to AoChannel, AoData is NULL
18023	Pointer to AiChannel, AiData is NULL
18044	Pointer to AiChannel, AiType, AiPeriod is NULL
18062	Pointer to DoBit, DoData is NULL
18082	Pointer to DoPort, DoData is NULL
18100	Invalid data buffer address
18103	Pointer to DiBit, DiData is NULL
18123	Pointer to DiPort, DiData is NULL
18141	Pointer to Data is NULL
18181	Pointer to Data is NULL
18200	Window handle is invalid
18221	Pointer to Data is NULL
18261	Pointer to Data is NULL
18301	Pointer to Data is NULL
18341	Pointer to Data is NULL
20000	It failed in memory allocation for the object preparation Memory is insufficient. Terminate the unnecessary applications
20001	This function can't be used by this device This function cannot be used in the device without this functionality
20002	Can not use while by another device works
20003	Can not use because another process is using the device When another process is using the device, all functions except for those that support multi-process can not be performed.
20020	CRC error
20021	Bit pack error
20022	Toggle mismatch
20023	Stall PID
20024	Device not responding
20025	PID check failure
20026	Unexpected PID
20027	Data overrun
20028	Data underrun
20029	Buffer overrun
20030	Buffer underrun
20031	Endpoint halted
20032	Not found device information
20033	Access denied
20034	Invalid handle
20035	It's need to upgrade the firmware
20036	It's need to upgrade the host driver
20037	It failed in USB transfer
20100	The number of processes met an upper limit Up to 16 processes can be executed simultaneously.
20160	It failed in the reset of the device
20161	It failed in the reset of the bus-master
20340	The value of Signal is outside the designated range of the device being used
20341	The value of Value is outside the designated range of the device being used
20350	The value of Signal is outside the designated range of the device being used
21000	An analog input method can't be established with the device being used Device is without this functionality.
21001	The value of AiInputMethod is different from JP value Must set analog input method by JP on device.
21020	It was set up by the number of maximum channels because it exceeded the number of maximum channels of the device The setting is automatically changed to the maximum number of channels.
21040	The value of AiChannel is outside the designated range of the device being used
21041	The value of AiRange is outside the designated range of the device being used
21042	JP of the device must be set in unipolar JP on device was set bipolar.
21043	JP of the device must be set in bipolar JP on device was set unipolar.
21044	It failed in the setting of the range
21060	The value of AiRange is outside the designated range of the device being used
21061	JP of the device must be set in unipolar JP on device was set bipolar.
21062	JP of the device must be set in bipolar JP on device was set unipolar.
21063	It failed in the setting of the range
21080	The value of AiMemoryType is outside the designated range of the device being used
21120	The value of AiClockType is outside the designated range of the device being used
21140	The value of AiSamplingClock is outside the designated range of the device being used
21160	The value of AiStartTrigger is outside the designated range of the device being used
21180	The value of AiChannel is outside the designated range of the device being used
21181	Data to establish in the 12 bits device are within the range of 0 to 4095
21182	Data to establish in the 16 bits device are within the range of 0 to 65535
21183	A resolution can't be acquired
21184	The value of AiDirection is outside the designated range of the device being used
21260	The value of AiStopTrigger is outside the designated range of the device being used
21281	The value of AiStopTimes is outside the designated range of the device being used
21300	The value of AiChannel is outside the designated range of the device being used
21301	Data to establish in the 12 bits device are within the range of 0 to 4095
21302	Data to establish in the 16 bits device are within the range of 0 to 65535
21303	A resolution can't be acquired
21304	The value of AiDirection is outside the designated range of the device being used
21420	The value of AiChannel is outside the designated range of the device being used
21421	AD conversion error occurred Please contact CONTEC Information Center.
21423	The channel which isn't being used for the conversion is specified
21440	AD conversion error occurred Please contact CONTEC Information Center.
21441	The number of conversion channels was exceeded. It is converted on the maximum channel
21460	Because sampling clock period error occurs, you must reset a device
21461	Virtual memory can't be allocated Memory is insufficient. Terminate the unnecessary applications.
21462	Virtual memory can't be initialized Please contact CONTEC Information Center.
21463	In the software start, set up the repeat number in 1
21464	Failed in the creation of the driver thread Please contact CONTEC Information Center.
21466	A user buffer isn't set up
21469	Buffer overflow error occurred, you must reset a memory
21480	A conversion can't be stopped with this command, use AioResetDevice function
21481	It failed in the stop of master transfer
21520	It failed in the acquisition of the sampling times Please contact CONTEC Information Center.
21580	It tried to acquire data beyond the converted number. AiSamplingTimes is changed to the maximum value
21581	It failed in the acquisition of the address
21584	FIFO is empty
21585	It tried to acquire data beyond the memory size. AiSamplingTimes is changed to the maximum value
21760	The value of AiChannel is outside the designated range of the device being used
21761	The value of Sequence is outside the designated range of the device being used
21770	The value of AiChannel is outside the designated range of the device being used
21840	The value of AiChannel is outside the designated range of the device being used
21841	AD conversion error occurred
21843	The channel which isn't being used for the conversion is specified
21860	AD conversion error occurred
21861	The number of conversion channels was exceeded. It is converted on the maximum channel
21880	The value of AiChannels is outside the designated range of the device being used
21881	It tried to acquire data beyond the converted number. AiSamplingTimes is changed to the maximum value
21882	It failed in the acquisition of the address
21885	FIFO is empty
21886	It tried to acquire data beyond the memory size. AiSamplingTimes is changed to the maximum value
21920	The value of AiChannel is outside the designated range of the device being used
21921	The value of AiStartLevel is outside the designated range of the device being used
21922	A resolution can't be acquired
21923	The value of AiDirection is outside the designated range of the device being used
21930	The value of AiChannel is outside the designated range of the device being used
21940	The value of AiChannel is outside the designated range of the device being used
21941	The value of AiStopLevel is outside the designated range of the device being used
21942	A resolution can't be acquired
21943	The value of AiDirection is outside the designated range of the device being used
21950	The value of AiChannel is outside the designated range of the device being used
21960	The value of AiTransferMode is outside the designated range of the device being used
21980	The value of DataNumber is outside the designated range of the device being used
21981	Failed in the lock of the memory
21982	Failed in allocation of temporary memory
21984	BusMaster parameter error
22040	The value of AiChannel is outside the designated range of the device being used
22041	Data to establish in the 12 bits device are within the range of 0 to 4095
22042	Data to establish in the 16 bits device are within the range of 0 to 65535
22043	A resolution can't be acquired
22044	The value of StateTimes is outside the designated range of the device being used
22050	The value of AiChannel is outside the designated range of the device being used
22060	The value of AiChannel is outside the designated range of the device being used
22061	Data to establish in the 12 bits device are within the range of 0 to 4095
22062	Data to establish in the 16 bits device are within the range of 0 to 65535
22063	A resolution can't be acquired
22064	The value of StateTimes is outside the designated range of the device being used
22070	The value of AiChannel is outside the designated range of the device being used
22080	The value of AiChannel is outside the designated range of the device being used
22081	Data to establish in the 12 bits device are within the range of 0 to 4095
22082	Data to establish in the 16 bits device are within the range of 0 to 65535
22083	A resolution can't be acquired
22084	The value of StateTimes is outside the designated range of the device being used
22085	A driver inner error occurred
22090	The value of AiChannel is outside the designated range of the device being used
22100	The value of AiChannel is outside the designated range of the device being used
22101	Data to establish in the 12 bits device are within the range of 0 to 4095
22102	Data to establish in the 16 bits device are within the range of 0 to 65535
22103	A resolution can't be acquired
22104	The value of StateTimes is outside the designated range of the device being used
22105	A driver inner error occurred
22110	The value of AiChannel is outside the designated range of the device being used
22120	The value of AiTransferTimes is outside the designated range of the device being used
22140	It failed in the acquisition of the transfer times
22160	It failed in the acquisition of the replacement times
22200	The value of Range is outside the designated range of the device being used
22201	The value of Type is outside the designated range of the device being used
22202	The value of Data is outside the designated range of the device being used
22220	The value of Range is outside the designated range of the device being used
22221	The value of Type is outside the designated range of the device being used
22222	It failed to load the calibration data
22223	A driver inner error occurred
22240	The value of AiScanClock is outside the designated range of the device being used
22241	A driver inner error occurred
22310	The value of AiClockEdge is outside the designated range of the device being used
22520	An internal driver error has occurred
22521	The AutoMode value is out of the range of the device used
22522	The TransferSize value is out of the range of the device used
23000	The value of AoChannel is outside the designated range of the device being used
23001	DA conversion error occurred
23002	Specify data to establish in AoData in the range of 0 to 4095
23003	Specify data to establish in AoData in the range of 0 to 65535
23020	DA conversion error occurred
23021	The number of conversion channels was exceeded. It is converted on the maximum channels
23022	Specify data to establish in AoData in the range of 0 to 4095
23023	Specify data to establish in AoData in the range of 0 to 65535
23060	It is converted on the maximum channel because it exceeds the number of maximum channels of the device
23100	The value of AoChannel is outside the designated range of the device being used
23101	The value of AoRange is outside the designated range of the device being used
23102	It failed in the setting of the range
23120	The value of AoRange is outside the designated range of the device being used
23121	It failed in the setting of the range
23140	The value of AoMemoryType is outside the designated range of the device being used
23161	Repeat function is only available when using RING memory
23180	The value of AoClockType is outside the designated range of the device being used
23200	The value of AoSamplingClock is outside the designated range of the device being used
23220	Output data exceed memory capacity
23221	Failed in the allocation of the memory
23240	The value of AoStartTrigger is outside the designated range of the device being used
23260	The value of AoStopTrigger is outside the designated range of the device being used
23320	Data aren't established, or memory can't be secured
23321	Data aren't established
23326	A user buffer isn't set up
23500	The value of AoChannel is outside the designated range of the device being used
23501	DA conversion error occurred
23520	DA conversion error occurred
23521	The number of conversion channels was exceeded. It is converted on the maximum channels
23540	Output data exceed memory capacity
23541	The value of AoStartTrigger is outside the designated range of the device being used
23580	The value of AoTransferMode is outside the designated range of the device being used
23600	The value of DataNumber is outside the designated range of the device being used
23601	Failed in the lock of the memory
23602	Failed in allocation of temporary memory
23741	Failed in loading calibration data
23770	The value of AoClockEdge is outside the designated range of the device being used
23990	An internal driver error has occurred
23991	The AutoMode value is out of the range of the device used
23992	The TransferSize value is out of the range of the device used
24000	The value of DiBit is outside the designated range of the device being used
24010	The value of DiPort is outside the designated range of the device being used
24020	The value of DoBit is outside the designated range of the device being used
24030	The value of DoPort is outside the designated range of the device being used
24040	The value of Bit is outside the designated range of the device being used
24041	The value of Value is outside the designated range of the device being used
24050	The value of Bit is outside the designated range of the device being used
24060	The value of Dir is outside the designated range of the device being used
25000	The value of CntChannel is outside the designated range of the device being used
25002	Operation mode 'preset count value load' is not enable
25003	Operation mode 'Comparison count value load' is not enable
25010	The value of CntChannel is outside the designated range of the device being used
25020	The value of CntChannel is outside the designated range of the device being used
25021	The value of PresetNumber is outside the designated range of the device being used
25040	The value of CntChannel is outside the designated range of the device being used
25041	The value of ComparisonNumber is outside the designated range of the device being used
25060	The value of CntChannel is outside the designated range of the device being used
25061	The value of CntClockType is outside the designated range of the device being used
25070	The value of CntChannel is outside the designated range of the device being used
25080	The value of CntChannel is outside the designated range of the device being used
25090	The value of CntChannel is outside the designated range of the device being used
25100	The value of CntChannel is outside the designated range of the device being used
25120	The value of CntChannel is outside the designated range of the device being used
25121	The value of Value is outside the designated range of the device being used
25122	A driver inner error occurred
25123	The value of Signal is outside the designated range of the device being used
25130	The value of CntChannel is outside the designated range of the device being used
25131	The value of Signal is outside the designated range of the function
25140	The value of CntChannel is outside the designated range of the device being used
25160	The value of CntChannel is outside the designated range of the device being used
25180	The value of CntChannel is outside the designated range of the device being used
25181	A driver inner error occurred
25200	The value of CntChannel is outside the designated range of the device being used
25220	The value of CntChannel is outside the designated range of the device being used
25240	The value of CntChannel is outside the designated range of the device being used
26000	The value of TimerId is outside the designated range of the device being used
26010	The value of TimerId is outside the designated range of the device being used
26020	The value of TimerId is outside the designated range of the device being used
26040	The value of TimerId is outside the designated range of the device being used
26060	The value of TimerId is outside the designated range of the device being used
26080	The value of TimerId is outside the designated range of the device being used
26100	The value of TimerId is outside the designated range of the device being used
26120	The value of TimerId is outside the designated range of the device being used
26140	The value of TimerId is outside the designated range of the device being used
26160	The value of TimerId is outside the designated range of the device being used
27000	The value of Destination is outside the designated range of the device being used
27001	The value of Source is outside the designated range of the device being used
27002	An invalid connection
27010	The value of Destination is outside the designated range of the device being used
28000	The value of AoChannelNum is outside the designated range of the device being used
28001	The value of AoChannel is outside the designated range of the device being used
28002	A driver inner error occurred
28010	Number of channels is out of range
28011	Counter value is out of range
28012	Compare register number is out of range
28020	The value of AiChannelNum is outside the designated range of the device being used
28021	The value of AiChannel is outside the designated range of the device being used
28022	The value of AiData is outside the designated range of the device being used
28023	A driver inner error occurred
28024	Only available if the waveform type is fixed
28030	The coefficient of one-shot pulse width is out of range
28031	The input logic of control input signal is out of range
28032	The output data is out of range
28040	The value of AiChannelNum is outside the designated range of the device being used
28041	The value of AiChannel is outside the designated range of the device being used
28042	The value of AiType is outside the designated range of the device being used
28043	The value of AiPeriod is outside the designated range of the device being used
28044	A driver inner error occurred
28060	The value of DoBitNum is outside the designated range of the device being used
28061	The value of DoBit is outside the designated range of the device being used
28062	A driver inner error occurred
28080	The value of DoPortNum is outside the designated range of the device being used
28081	The value of DoPort is outside the designated range of the device being used
28082	A driver inner error occurred
28100	The value of DiBitNum is outside the designated range of the device being used
28101	The value of DiBit is outside the designated range of the device being used
28102	The value of DiData is outside the designated range of the device being used
28103	A driver inner error occurred
28120	The value of DiPortNum is outside the designated range of the device being used
28121	The value of DiPort is outside the designated range of the device being used
28122	The value of DiData is outside the designated range of the device being used
28123	A driver inner error occurred
28140	The value of Data is outside the designated range of the device being used
28141	A driver inner error occurred
28180	The value of Data is outside the designated range of the device being used
28181	A driver inner error occurred
28220	The value of Data is outside the designated range of the device being used
28221	A driver inner error occurred
28260	The value of Data is outside the designated range of the device being used
28261	A driver inner error occurred
28300	The value of Data is outside the designated range of the device being used
28301	A driver inner error occurred
28340	The value of Data is outside the designated range of the device being used
28341	A driver inner error occurred
28380	A driver inner error occurred
28420	A driver inner error occurred
28460	A driver inner error occurred
28500	A driver inner error occurred
28540	A driver inner error occurred
28580	A driver inner error occurred
28620	A driver inner error occurred
29000	Access error
29001	Access violation
29002	Area error
29003	Access size error
29004	Parameter error
29005	Length error
29006	Insufficient resources
29016	Communications timeout
29017	Handle error
29018	Close error
29064	Wireless communications timeout
29065	Not Device
The others	Reserved error code which isn't being used at present Please contact CONTEC Information Center